Classify Your Medical Device (from the FDA webside)

時間：2023-11-12作者：上海角宿企業管理咨詢有限公司瀏覽：20

The Food and Drug Administration (FDA) has established classifications for approximately 1,700 different generic types of devices and grouped them into 16 medical specialties referred to as panels. Each of these generic types of devices is assigned to one of three regulatory classes based on the level of control necessary to assure the safety and effectiveness of the device. The three classes and the requirements which apply to them are:

Device Class and Regulatory Controls

1. Class I General Controls

· With Exemptions

· Without Exemptions

2. Class II General Controls and Special Controls

· With Exemptions

· Without Exemptions

3. Class III General Controls and Premarket Approval

The class to which your device is assigned determines, among other things, the type of premarketing submission/application required for FDA clearance to market. If your device is classified as Class I or II, and if it is not exempt, a 510k will be required for marketing. All devices classified as exempt are subject to the limitations on exemptions. Limitations of device exemptions are covered under 21 CFR xxx.9, where xxx refers to Parts 862-892. For Class III devices, a premarket approval application (PMA) will be required unless your device is a preamendments device (on the market prior to the passage of the medical device amendments in 1976, or substantially equivalent to such a device) and PMA's have not been called for. In that case, a 510k will be the route to market.

Device classification depends on the intended use of the device and also upon indications for use. For example, a scalpel's intended use is to cut tissue. A subset of intended use arises when a more specialized indication is added in the device's labeling such as, "for making incisions in the cornea". Indications for use can be found in the device's labeling, but may also be conveyed orally during sale of the product. A discussion of the meaning of intended use is contained in The 510(k) Program: Evaluating Substantial Equivalence in Premarket Notification [510(k)].

In addition, classification is risk based, that is, the risk the device poses to the patient and/or the user is a major factor in the class it is assigned. Class I includes devices with the lowest risk and Class III includes those with the greatest risk.

As indicated above all classes of devices as subject to General Controls. General Controls are the baseline requirements of the Food, Drug and Cosmetic (FD&C) Act that apply to all medical devices, Class I, II, and III.

How to Determine Classification

To find the classification of your device, as well as whether any exemptions may exist, you need to find the regulation number that is the classification regulation for your device. There are two methods for accomplishing this: go directly to the classification database and search for a part of the device name, or, if you know the device panel (medical specialty) to which your device belongs, go directly to the listing for that panel and identify your device and the corresponding regulation. You may make a choice now, or continue to read the background information below. If you continue to read, you will have another chance to go to these destinations.

If you already know the appropriate panel you can go directly to the CFR and find the classification for your device by reading through the list of classified devices, or if you're not sure, you can use the keyword directory in the PRODUCT CODE CLASSIFICATION DATABASE. In most cases this database will identify the classification regulation in the CFR. You can also check the classification regulations below for information on various products and how they are regulated by CDRH.

Each classification panel in the CFR begins with a list of devices classified in that panel. Each classified device has a 7-digit number associated with it, e.g., 21 CFR 880.2920 - Clinical Mercury Thermometer. Once you find your device in the panel's beginning list, go to the section indicated: in this example, 21 CFR 880.2920 . It describes the device and says it is Class II. Similarly, in the Classification Database under "thermometer", you'll see several entries for various types of thermometers. The three letter product code, FLK in the database for Clinical Mercury Thermometer, is also the classification number which is used on the Medical Device Listing form.

Once you have identified the correct classification regulation go to What are the Classification Panels below and click on the correct classification regulation or go to the CFR Search page. Some Class I devices are exempt from the premarket notification and/or parts of the good manufacturing practices regulations. Approximately 572 or 74% of the Class I devices are exempt from the premarket notification process. These exemptions are listed in the classification regulations of 21 CFR and also has been collected together in the Medical Device Exemptions document.

If you would like a formal device determination or classification from the FDA, consider submitting a 513(g) Request. For instructions on how to submit a 513(g) Request, refer to the guidance document “FDA and Industry Procedures for Section 513(g) Requests for Information under the Federal Food, Drug, and Cosmetic Act Guidance (2012).” For further information, you may view the CDRH Learn training module entitled 513(g) Requests for InformationExternal Link Disclaimer (under the section “How to Study and Market Your Device,” subsection “Classification”).

Note that there is a user fee for a 513(g) request. Per the user fees webpage, there is a reduced “Small Business” fee option for eligible businesses. You may refer to the Reduced Medical Device User Fees: Small Business Determination (SBD) Program webpage for details, including the eligibility criteria, the application process, the application guidance document, and reference to CDRH Learn educational videos.



上海角宿企業管理咨詢有限公司專注于FDA510(K),N95認證,TGA注冊,歐代注冊,歐洲自由銷售證明,MDR認證,ISO13485認證,SFDA注冊,FDA注冊等, 歡迎致電 17802157742

• 詞條

  詞條說明

• MDR法規下CE認證需要注意什么事項？

  1.歐盟授權代表合同必須由制造商和歐盟授權代表公司直接簽訂才有效。2.找*的第三方，盡量不要找代理商和經銷商。為了盡量降低制造商子啊將來會面對產品違規和出事故的法律成本，盡量找*的第三方作歐盟授權代表，避免那些僅擅長于營銷的經銷商，代理商以及展覽會服務商等等代理機構。3.歐盟授權代表也是其聲譽、資歷、經驗的招牌，只有擁有了CE認證，在國外市場上才會增加消費者的信任，消費者才會愿意購買你的商品。4.

• 什么是MDR法規下的DOC？

  DOC的全稱“Declaration of Conformity"，中文稱為符合性聲明。DOC是由醫療器械制造商起草編寫的文件，且沒有特定的格式規定。這意味著企業須自行根據要求編寫。MDR法規的附錄IV對DOC的要求進行了描述，DOC應該被視為制造商遵守MDR規則的自我承諾。符合性聲明的規定：以下列出的是歐盟符合性聲明的一些特殊性摘要，這些在MDR法規的*19條中有說明。說明：您需要聲明您正在滿足

• FDA 483表格，如何回復能較有效？

  什么是FDA 483表格？在FDA的GMP檢查中，缺陷會在編號為483的表格上注明。這個483表格在檢查結束時會交給被檢驗公司。隨后被檢查公司必須及時（通常為15個工作日）回應該483表格，并確定糾正預防措施，糾正預防措施也應當有時限要求。如果483表格回復不充分，F(xiàn)DA隨后會發出警告信。簡而言之，F(xiàn)DA 483表格就是FDA檢查官對醫療器械企業進行檢查后發給該公司的缺陷清單，也稱為現場檢查報告。

• 澳洲TGA代理人在醫療器械注冊認證銷售中的重要性，不可不知道

  如果您計劃在澳大利亞銷售醫療器械和IVD產品，那么您需要指定一個澳大利亞TGA代理人或代理機構。根據澳大利亞規定，非澳大利亞制造商若要在該國銷售醫療器械和IVD產品，必須指定澳大利亞代理人或TGA代理人。TGA代理人在醫療器械注冊和合規上扮演著重要的角色。本文將為您介紹澳洲TGA代理人的職責，以及選擇代理人的注意事項。?一、澳洲TGA代理人的職責根據《1989年澳大利亞醫療用品法》（Th