PROFINET, PROFIBUS, PROFIdrive Integrated

時間：2021-07-28作者：上海騰希電氣技術有限公司瀏覽：182

PROFINET, PROFIBUS, PROFIdrive Integrated



Interfaces for PROFINET and PROFIBUS DP communication are integrated in the SIMATIC Drive Controller. The following communication options are available for your automation task:

列表: SIMATIC Drive Controller communication options

Communication option	PN	DP
PG communication for commissioning, testing and diagnostics	X	X
HMI communication for operator control and monitoring	X	X
Data exchange with TCP/IP, UDP, ISO-on-TCP, ISO protocol	X	-
Data exchange via OPC UA as server	X	-
Data exchange via OPC UA as client	X	-
Direct data exchange between IO controllers	X	-
Communication via Modbus TCP	X	-
Communication via UDP Multicast	X	-
Sending process messages via e-mail	X	-
S7 communication	X	X
S7 routing	X	X
Web server of the CPU Data exchange via HTTP(S), for example for diagnostics	X	-
SNMP (Simple Network Management Protocol)	X	-
Time-of-day synchronization	X	X
Coupling with the clock pulse system of the technology I/Os X142 and with SINAMICS Integrated	X	-

The SIMATIC Drive Controller also has two USB interfaces 3.0. These do not currently have an assigned function.

PROFIdrive Integrated

Communication between CPU and SINAMICS Integrated is based on PROFIdrive mechanisms. The communication services used for this are based on PROFIBUS DP and are processed over an internal, high-performance interface that allows cycle times as low as 250 μs.


上海騰希電氣技術有限公司專注于西門子PLC,V90伺服,V20變頻器等, 歡迎致電 13681875601

• 詞條

  詞條說明

• 冗余模式RSTP、MSTP、CIST

  RSTP、MSTP、CIST快速生成樹協議 (RSTP)STP 的一個缺點是如果出現中斷或設備故障，網絡需要對自身進行重新組態：僅當出現中斷時設備才會開始協商新路徑。這較多需要 30 秒鐘的時間。為此，STP 得到了擴展以創建“快速生成樹協議”（RSTP，IEEE 802.1w）。設備在正常運行期間已經收集到有關備選路徑的信息，不需要在發生中斷后再收集此信息，這點與 STP 有本質區別。這意味著，

• IPv4 * 3 層功能 靜態路由

  靜態路由靜態路由在此頁面*可用于在不同子網之間進行數據交換的路由。不支持動態路由協議，如 RIP、OSPF。說明該頁面包含以下框：目標網絡 (Destination Network)輸入可通過此路由訪問的目標的網絡地址。子網掩碼 (Subnet Mask)輸入相應的子網掩碼。網關 (Gateway)輸入可用來訪問此網絡地址的網關的 IPv4 地址。接口 (Interface)選擇路由的接口。管理

• “目標計算機組態”對話框

  “目標計算機組態”對話框此對話框用于顯示當前組態，其中包括模塊和應用程序。在此處，您可以將當前組態與已完成的組態相比較。站此處會顯示站名稱。如果在安裝完 SIMATIC NET PC 軟件后，尚未給目標站組態新名稱，則此站名稱可以與目標計算機的計算機名稱相同。 引導期間，較初會將計算機名稱傳送為站名稱。

• 激活用戶管理

  激活用戶管理在 TIA Portal 項目中，通過用戶管理保護項目，防止未經授權的訪問。激活用戶管理時，系統將自動創建一個項目管理員。之后，項目管理員可創建其他用戶。激活用戶管理時，僅具有足夠權限的用戶才能打開和更改項目。提示不可禁用用戶管理注意項目的用戶管理啟動后無法禁用。這也表示無法撤消項目保護。操作步驟要激活用戶管理，請按以下步驟操作：在項目樹中，打開“安全設置”(Security sett