MC-servo OB

時間：2021-07-27作者：上海騰希電氣技術有限公司瀏覽：332

MC-servo OB



Description

When you create a technology object for S7-1500 Motion Control, the organization block MC?Servo [OB91] for processing the technology objects is created automatically. The Motion Control functionality of the technology objects creates its own execution level and is called in the SIMATIC S7?1500 execution system according to the application cycle.

The MC?Servo [OB91] is write-protected. The contents cannot be changed.

The position control algorithms of all technology objects configured for Motion Control on the CPU are calculated within the MC?Servo [OB91].

You can set the application cycle and the priority of the organization block in accordance with your requirements for control quality and system load.

Application cycle

You can set the application cycle in which the MC?Servo [OB91] is called in the properties of the organization block:

Synchronous to the BUS

The MC?Servo [OB91] is called synchronously with a bus system. You set the send clock in the properties of the selected bus system. You can select the following bus systems:

- PROFIBUS DP

- PROFINET IO

- Local bus system (as of V4.0 or FW version ≥ 2.6)

- X142 interface (only SIMATIC Drive Controller)

You cannot call the MC?Servo [OB91] synchronously with a bus system that is connected to the CPU via a communications processor / communications module (CP / CM).

Cyclical

The MC?Servo [OB91] is called cyclically with the specified application cycle.

The selected application cycle must be long enough to allow all the technology objects for motion control to be processed in one cycle. If the application cycle is not observed, overflows occur. The CPU switches to STOP mode in the case of an overflow of the MC?Servo [OB91].

Clock reduction (CPU V1.5 and higher)

You can reduce the application cycle of the MC?Servo [OB91] relative to the send clock of an isochronous PROFINET IO system. You can set an integer multiple of the send clock as the factor. Values up to 14 times the send clock (maximum 32 ms) are possible for the application cycle.

If you call an isochronous mode interrupt OB and the MC?Servo [OB91] synchronously with the same PROFINET IO system, you must set the same application cycle for both organization blocks.


上海騰希電氣技術有限公司專注于西門子PLC,V90伺服,V20變頻器等, 歡迎致電 13681875601

• 詞條

  詞條說明

• SNTP 客戶端

  SNTP 客戶端網絡中的時間同步SNTP（Simple Network Time Protocol，簡單網絡時間協議）用于在網絡中同步時間。SNTP 服務器在網絡中發送適當?shù)膸Ｌ崾緸楸苊鈺r(shí)間跳躍，需確保網絡中只有一臺時間服務器。說明SNTP 客戶端 (SNTP Client)使用 SNTP 啟用或禁用自動時鐘同步。當前系統時間 (Current System Time)（僅在線時可用）顯示由工業

• 為安全事件組態組報警

  為安全事件組態組報警要求STEP 7 V13 SP 1 或較高版本S7-1500 CPU 固件版本 V1.7 或較高版本操作步驟要為安全事件組態組報警，請按以下步驟操作：單擊網絡視圖中的 CPU 符號。CPU 的屬性隨即顯示在巡視窗口中。轉至“保護 > 安全事件”(Protection > Security event) 區域。單擊“安全事件”(Security event)。選擇“出

• WinCC V8.0

  2. 目錄與直接的先前版本 SIMATIC WinCC V7.5 SP2 相比， 新的 SIMATIC WinCC V8.0 提供了以下改進和增強，包括 關于功能范圍（除了合并所有 以前的 WinCC 新）：?2.1. 操作 系統WinCC V8.0 支持以下 Microsoft 操作系統：Windows 10（64 位）版、企業版Windows 11（64 位）版、企業版Windows

• 通過遙控實現 TeleService

  通過遙控實現 TeleService通過遙控實現 TeleService 的通信路徑借助通過遙控實現的 TeleService，工程師站與遠程 S7 站之間的連接始終使用 TeleService 服務器作為中介。建立連接的請求由工程師站觸發，并由 TeleService 服務器轉發。根據到工作站的可用通信路徑的不同，TeleService 服務器會通過 LAN 或喚醒 SMS 將請求轉發至下一個工