無線測溫產品在馬來西亞某配電項目的應用

時間：2021-12-22作者：江蘇安科瑞電器制造有限公司瀏覽：79

摘要：配電系統是由多種配電設備和配電設施所組成的變換電壓和直接向終端用戶分配電能的一個電力網絡系統。由于配電系統作為電力系統的一個環節直接面向終端用戶，它的完善與否直接關系著廣大用戶的用電可靠性和用電質量，因而在電力系統中具有重要的地位。因此，為避免因溫度高，導致設備老化，設備燒壞，供電中斷，一次設備起*炸等嚴重事故，對各電氣節點進行長期的溫度監測能避免因嚴重故障，造成用戶的人身傷害及經濟損失。

Abstract: The power distribution system is a power network system that is composed of a variety of power distribution equipment and power distribution facilities to transform voltage and directly distribute electrical energy to end users. As a part of the power system, the power distribution system directly faces end users, and its perfection directly affects the reliability and quality of power consumption of the majority of users, so it has an important position in the power system. Therefore, in order to avoid serious accidents such as equipment aging, equipment burnout, power supply interruption, fire and explosion of equipment due to high temperature, long-term temperature monitoring of each electrical node can avoid serious failures that may cause personal injury and economic loss to users.

關鍵字：無線測溫傳感器，無線測溫系統，433Mhz無線測溫

Keywords: Wireless temperature sensor, wireless temperature monitoring system, 433Mhz wireless temperature sensor

1.項目概述 Project Overview

本項目為馬來西亞某配電室的應用，應用在33kV的配電盤中，需要配置無線測溫產品，實現安全溫度監測。銅排尺寸為10mm×130mm，選擇我司ATE400型CT感應取電式傳感器，并且采用ATC450收發器來連接顯示裝置。通過RS485通訊數據傳輸?shù)娇蛻羝脚_進行實時監控，可防止過熱故障，影響設備正常運行，避免安全隱患。出于安全和經濟效益考慮，建議在配電室各電氣節點進行溫度實時監測。

This project is an application in a distribution room in Malaysia. It is used in a 33kV switchboard and needs to be equipped with wireless temperature measurement products to achieve safe temperature monitoring. The size of the copper bar is 10mm×130mm. Choose our ATE400 CT powered temperature sensor, and use ATC450 transceiver to connect to the display device. The RS485 communication data is transmitted to the customer platform for real-time monitoring, which can effectively prevent overheating failures, affecting the normal operation of the equipment, and avoiding potential safety hazards. For the sake of safety and economic benefits, it is recommended to conduct real-time temperature monitoring at each electrical node in the power distribution room.

2.無線測溫產品介紹

Introduction of Wireless Temperature Measurement Product

安科瑞在線測溫裝置適用于高低壓開關內線纜街頭，斷路器觸頭，高壓線纜中間頭，低壓大電流等設備的溫度檢測，防止在運行過程中因氧化，松動等因素造成接點接觸電阻過大而發熱成為安全隱患，及時，持續及準確反映設備運行狀態，提供設備安全性。

Acrel on-line temperature measurement device is suitable for the temperature detection of high and low voltage switches, circuit breaker contacts, high voltage cable middle heads, low voltage and high current equipment, to prevent contact caused by oxidation, loosening and other factors during operation Excessive contact resistance and heat generation become a safety hazard, timely, continuous and accurate reflection of equipment operating status, and equipment safety.

3.無線測溫系統特點 Features of Wireless Temperature Monitoring System

（1）無線測溫模塊安全可靠、安裝維護簡單，適合對中開關高電壓、大電流接點處進行溫度監測，被測設備的結構不需要變動。

（2）整個無線測溫系統可以通過無線方式通訊，信號傳輸方便。

（3）無線測溫系統抗干擾能力強，對脈沖干擾、快速瞬變干擾、靜電輻射、電磁場輻射等的抗干擾能力達到國家四級標準，同時設備運行不影響中壓開關的分、合閘操作以及保護裝置的動作。

（4）應用在工業（煤礦、鋼鐵、石油、化工）、電廠、學校、醫院、**建設、交通設施（機場、火車站）、商業建筑、會展中心、光伏發電、新能源等領域。

(1) The wireless temperature measurement module is safe and reliable, and easy to install and maintain. It is suitable for temperature monitoring at the high voltage and high current contacts of the middle switch. The structure of the device under test does not need to be changed.

(2) The entire wireless temperature measurement system can communicate wirelessly, and the ** transmission is convenient.

(3) The wireless temperature measurement system has strong anti-interference ability, and its anti-interference ability against pulse interference, fast transient interference, electrostatic radiation, electromagnetic field radiation, etc. has reached the national four-level standard, and the operation of the equipment does not affect the opening and closing of the medium voltage switch Operation and protection device actions.

(4) Application in industry (coal, steel, petroleum, chemical), power plants, schools, hospitals, municipal construction, transportation facilities (airports, railway stations), commercial buildings, convention and exhibition centers, photovoltaic power generation, new energy and other fields.

4.無線測溫解決方案 Wireless Temperature Monitoring Solution

4.1 測溫傳感器 Wireless temperature sensor

4.1.1 CT感應取電無線測溫傳感器 Wireless temperature sensor by CT sensing

ATE400

·Small size;

·Wireless transmit;

·Wireless transmission distance, 150 meters;

·Fase sampling frequency,15s;

·CT-powered, more than 5A starting current;

·Widely temperature measuring range, -40℃~125℃.

4.1.2電池供電型無線測溫傳感器 Wireless temperature sensor powered by battery

1) ATE200

·Wireless transmit;

·Wireless transmission distance, 150m;

·Fase sampling frequency, 25s;

·Battery -powered, more than 5 years;

·Widely temperature measuring range, -40℃~125℃.

ATE100

·Wireless transmit;

·Wireless transmission distance, 150m;

·Fase sampling frequency, 25s;

·Battery -powered, more than 5 years;

·Widely temperature measuring range, -40℃~125℃.

ATE100M

·Wireless transmit;

·Wireless transmission distance, 150m;

·Fase sampling frequency, 25s;

·Battery -powered, more than 5 years;

·Widely temperature measuring range, -40℃~125℃.

4.2 采集/顯示終端 Receiver/Display Unit

4.2.1 接收單元 Receiver

1)ATC600-C

·Wireless transceiver;

·Maximum measuring 240 points;

·1 RS485 serial communication, Modbus-RTU;

·2 alarm relays;

·Power supply adapt with AC/DC220V, AC/DC110V.

2)ATC450-C

·Wireless transceiver;

·Maximum measuring 60 points;

·1 RS485 serial communication, Modbus-RTU;

·Power supply adapt with DC24V

4.2.2 顯示單元 Display Unit

1) ARTM-Pn

·Wireless temperature measurement, maximum measuring 60 points;

·U, I, P, Q, f, Ep, Eq measurement；

·4 digital inputs;

·2 alarm relays;

·LCD display;

·Power supply adapt with AC220V, DC220V, DC110V, AC110V;

·1 RS485 serial communication, Modbus-RTU.

5.結構圖 Typical Connection

6.應用場景 Application

7.現場圖片 Photos on Site

參考文獻Bibliography

1.Solutions For Enterprise Micro-grid System 2020.02

相關產品：多功能電表、導軌式智能電表、無線電表、4G電表、NB電表、電機保護器、馬達保護器、線路保護器、預付費電表、無線測溫、電房**系統、配電室綜合監控系統、電能管理系統、能耗管理系統、用電管理系統、能源信息化系統、預付費管理系統


江蘇安科瑞電器制造有限公司專注于線路保護器,電機保護器,用電管理系統,能耗管理系統,預付費電表,預付費管理系統等

• 詞條

  詞條說明

• 合理利用能效管理平臺規避能耗**限電價加價機制

  10月3日，浙江省發布《浙江省關于建立健全高耗能行業階梯電價和單位產品**能耗限額標準懲罰性電價的實施意見（征求意見稿）》。意見明確了八大高耗能行業列入了階梯電價加價范圍，包括紡織、非金屬礦物制品業、金屬冶煉及壓延加工業、化學原料及化學制品制造業、石油煤炭及其他燃料加工、造紙和紙制品、化學纖維制造、電力熱力的生產和供應業，浙江本次將“數據中心”作為階梯電價加價范疇。另外明確**限額電價檔次和執行標準：

• 江蘇朗佑部件制造有限公司年產2000萬膜次汽車零部件生產線新建項目建筑能耗監測系統的應用

  摘要：隨著社會生活水平的提高，經濟的繁榮發展，人們對能源的需求逐漸增長，由此帶來的能源危機日益嚴重。辦公建筑如何實時的了解、分析和控制能源消耗已成為需要解決的迫在眉睫的難題。傳統的能源消耗智能以月/季度/年為周期進行，然而辦公建筑是每日、每時都在進行，能源消耗也是每日、每時的發生。本文介紹江蘇朗佑部件制造有限公司年產2000萬膜次汽車零部件生產線建筑能耗監測系統，系統采用現場就地組網的方式，組網后

• 漏電監測在景觀噴泉、噴水池的應用

  摘 要：我們都知道公交站臺上的廣告牌，里面充斥著各種電線，由于風吹日曬，再加上缺乏維護，有些是燈直接不亮，有些是出現漏電現象。由于供電線路長期在戶外使用，運行環境較為惡劣，而且在設計或建設時采用的安全等級標準和防護等級標準不高等，供電線路容易老化失效、出現漏電現象。對于單個公交車站臺或者公交崗?fù)み@種孤島系統來說，如果供電系統采用配電箱集中供電，適宜在主控制箱內設置剩余電流監測儀，實時監測各個回路的

• 電機保護器市場現狀分析

  電機保護器市場現狀分析目前，在電動機保護上，大量使用的還是雙金屬的機械式熱繼電器。但是，機械式熱繼電器對于電動機的保護功能是十分有限的。據市場不完全統計，每100次可能引發電動機燒毀的故障中，機械式熱繼電器能起到保護作用的次數不到30次。究其原因，主要還是因?yàn)殡p金屬片機械式熱繼電器存在三大缺陷：**，整定誤差大，無法精確設定保護值；*二，雙金屬片容易出現熱疲勞，過熱數次之后還會引起參數變化；*三，