蒸汽鍋爐定期檢驗的分類和各自的檢驗周期技術性探討

時間：2017-03-24作者：河南省四通鍋爐有限公司瀏覽：416

Steam boiler periodic inspection of the classification and their respective technical inspection cycle
蒸汽鍋爐定期檢驗的分類和各自的檢驗周期技術性探討
在役鍋爐的定期檢驗分為：外部檢驗、內部檢驗和**壓實驗。
各自周期為：
（1）外部檢驗：每年不少于一次。
（2）內部檢驗：結合每次大修進行，其檢驗內容應列入太康鍋爐有限公司鍋爐年度大修計劃。新投產鍋爐運行一年后應進行**內部檢驗。
（3）**壓試驗：一般兩次大修進行一次（根據設備具體技術狀況，經上級鍋爐壓力容器安全監察機構同意可適當延長或縮短**壓實驗間隔時間）。**壓實驗可結合大修進行，列入大修的特殊項目。
The classification of the boiler in service inspection regularly and their respective technical inspection cycle
Regular inspection of the boiler in service can be divided into: the external inspection, internal inspection and overpressure experiments.
Each cycle as follows:
(1) the external inspection: no less than once a year.
(2) internal inspection: combining each overhaul, the inspection items shall be included in the annual overhaul plan of boiler of minzhu boiler co., LTD. One year after the new production of boiler operation should be the internal inspection for the first time.
(3) the overpressure test: general overhaul a twice (according to the specific technical equipment status, with the approval of the superior boiler pressure vessel safety supervision organization can extend or shorten the overpressure experimental time interval). Overpressure experiment can be combined with the overhaul, included in the overhaul of the special projects.
信息來源于

河南省四通鍋爐有限公司專注于1噸燃?xì)忮仩t價格,2噸燃油鍋爐,4噸*鍋爐,6噸生物質鍋爐,0.3噸燃電鍋爐,0.5噸燃煤鍋爐等

• 詞條

  詞條說明

• 蒸汽鍋爐機組緊急事故處理的總原則

  The general principle of steam boiler unit of accident and emergency 蒸汽鍋爐機組緊急事故處理的總原則 1, the operation personnel should be: accurately determine the cause of the accident; Eliminate the scourge of acc

• 斯里蘭卡客戶來公司考察訂購鍋爐

  斯里蘭卡客戶來公司考察訂購鍋爐 Sri Lanka customers to order boiler company inspection 信息來源于：http://

• 客戶案例

• 蒸汽鍋爐隱患分析及預防

  蒸汽鍋爐隱患分析及預防 鍋爐結構不合理造成某些部位強度不夠、水循環不良、存在熱偏差或爐體不能自由膨脹等；鍋爐材質不符合質量要求；制造工藝不當，受壓部件存在內應力；排污口安裝高，泥渣無法排盡；鍋爐兩端無膨脹滑動支點，管道膨脹受阻；安全閥設計不合理，調試不符合要求；水位表安裝位置不合理；壓力表不準或連接管未按要求安裝；防爆門過重或卸壓面積不足；排煙溫度設計不合理等。 鍋爐運行管理不善造成鍋爐缺水或滿水