platinum curing silicone

時間：2019-08-07作者：深圳市紅葉杰科技有限公司瀏覽：605

HY-E600 Addition Cure Mold Making Silicone Rubber

Description

HY-E600 is a kind of two part silicone rubber in addition cure or platinum cure　type with mixing ratio of 1:1 or 10:1 . It can cure at room temperature as well as under heat . It’s a kind of food grade silicone and mainly used for mold making.




Application

HY-E600 silicone rubber　is　mainly used　for　making molds of concrete stone,GRC,polyurethane　products ; wax, candle　decoration ; rapid prototyping and tyre molds; chocolate,candy and similar products .

Technical Parameters

Model	Color	Mixing ratio (%)	Pot　life (mins, under 25℃)	Curing time	Hardness 　( Shore A　)	Tensile- strength 　(MPa)	Tear- strength (kN/m)	Viscosity （After A/B mixed ,mPa.s）	Shrinkage rate (%)	Elongation （%）
HY-E600	Translucent	1:1 or 10:1	30-40	4-5(hrs under 25℃) 20-30 (mins under 60℃)	0	3.5±0.5	5±0.5	3500±1000	≤0.1%	300%

Characteristics

＊An exceptional fluidity and good operability, easy to demold

＊Good　tensile and tear strength

＊Outstanding bubble releasing

＊Non-deformation

＊Low shrinkage

＊Aging resistance　,high temperature resistance (200℃)

＊Environmentally, food-grade




Operation instructions

Step 1: prepare the original molds

Prepare an perfect original mold and clean it totally before operation .

＊Notes:Make sure your original molds　and operation tool cleaned up totally to avoid uncure problem .

Step 2: Take 100 G part A and 100 G part B (Or 100 G part A and 10 G part B) and mix them evenly.

＊Notes: Addition cure mold　making silicon rubber is two part　flowing liquid , Pls follow the step strictly:

1.Weigh the two part exactly by electronic weight..

If any part not in exactly weight , it may cause changing of hardness , or even cause uncure problem.

2.Mix part A and part B evenly.

Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What’s more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.

Step 3: Vacuum pumping

Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.




Step 4: Pouring casting or Brush operation

＊Notes:1. For simple pattern products we suggest use pouring operation way , which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air .

2.For delicate pattern products we suggest use brushing operation way , which can copy the pattern exactly . Brushable silicone require high viscosity which won’t be easy to flow away and easy to brush .

3. We suggest to set the silicone mold for another 12 hours after demould before put into large production .




Warm tips :

As addition cure silicone is a kind of platinum cure system ,which will be easy to cause uncure problem ,so

Kindly follow the tips below :

＊Do not mix with liquid condensation silicone rubber or even the tool which used for condensation silicone

＊Do not mix with organic matter which contains N, S, P organics and ionic compound like Sn, As,Hg, Ph,

＊Do not add any pigment or powder into the addition cure silicone rubber without any testing to prevent uncure problem

Package
20KG/drum vacuum packing for part A　 20KG/drum vacuum packing for part B

200KG/drum packing for part A　 200KG/drum packing for part B




Shelf life

Twelve(12) months when stored under　dry and cool place by original package under 25℃


深圳市紅葉杰科技有限公司專注于固化劑不發泡型,高分子防潮封堵劑,BBS防凝露封堵組料,高分子防凝露封堵材料,人體硅膠價格,加成型硅膠,模具硅膠價格,胸墊發泡硅膠,自流平封堵材料等

• 詞條

  詞條說明

• 硅膠模具縮水率怎么算

  進口原材料加成型食品級硅膠的用處：1） 用來制造各類模具如：糖藝模具、食物模具、樹脂鉆模具、文化石模具、水泥構件模具、蛋糕模具、金屬工藝品模具2） 用于制造各類硅膠商品：服裝輔料矽利康、商標矽利康、嬰兒奶嘴、涂布印花、絲網打印矽利康、人體肌膚、胸墊、肩墊、人體器官、仿真人體、機器人用硅膠、游艇模具制作、快艇模具制作等。二、進口原材料加成型食品級硅膠的特性：1）、耐高溫、耐酸堿、環保無毒無味；2）、

• 液體硅膠幾個不固化的主要原因

  液體硅膠移印硅膠模硅膠不固化的原因很多，不固化可能由下面多種因素影響造成。是什么因素造成翻模硅膠不固化？配比不正確、攪拌不均勻、固化劑添加量太少、溫度不夠等等都會影響硅膠不固化。1、加成型硅膠AB配比為1:1，縮合型硅膠與固化劑配比為100:2-2.5，移印硅膠與固化劑匹配比為9:1。若硅膠與固化劑配比不正確會影響硅膠的固化，導致翻模硅膠出現不固化的現象。2、攪拌不均純屬于人員操作不當造成，跟硅膠

• 【固化劑不發泡型】固化劑分幾種？各有什么特點？

  固化劑分幾種？各有什么特點？1、胺類固化劑：⑴ 聚酰胺類：作為環氧樹脂固化劑的聚酰胺是由二聚、三聚植物油酸或不飽和脂肪酸與多元胺酰胺反應制得的。由于結構中含有較長的脂肪酸碳鏈和氨基，可使固化產物具有高的彈性和粘接力及耐水性，它的施工性也較好，配料比例較寬，毒性小，基本上無揮發物，能在潮濕的金屬、混凝土表面施工。但它的缺點是耐熱性比較低，熱變形溫度僅50℃左右；**15℃固化不，固化物的物理性能、機

• 加成型硅膠

  加成型硅膠1:1環保硅膠用于硅膠制品方面仿瓦克硅膠4644雙組份AB膠作等行業的制模材料A組分含交聯劑，B組分含催化劑。在包裝的過程中，交聯劑與催化劑必須分開。它的硫化是在室溫下進行，只要將兩組分按照一定的比例混合（具體比例可根據操作時間及產品性能確定），兩組分化合物發生交聯反應，形成有柔韌、彈性的膠體由于RTV-2具有優異的脫模性，因而作為軟模材料大量用于文物、工藝品、玩具、電子電器、機械零件等