ASTM A系列標準大全美國材料與試驗協會（四）

時間：2018-09-08作者：溫州亞仕密不銹鋼有限公司瀏覽：307

A576-90b(2000)	特級熱軋?zhí)妓劁摪?/span>	Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A577/A577M-90(2001)	鋼板的超聲角波束檢驗	Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A578/A578M-96(2001)	特殊設備用的普通鋼板和包覆鋼板的直波束超聲探傷檢驗	Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications
A579-04	**高強度合金鋼鍛件	Standard Specification for Superstrength Alloy Steel Forgings
A580/A580M-98	耐熱不銹鋼絲	Standard Specification for Stainless Steel Wire
A581/A581M-95b(2000)	高速切削用耐熱不銹鋼絲和盤條	Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
A582/A582M-95b(2000)e1	熱軋或冷精軋的高速切削不銹及耐熱鋼棒	Standard Specification for Free-Machining Stainless Steel Bars
A586-98	鍍鋅平行和螺旋形鋼絲繩	Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-Coated Wire for Spun-In-Place Structural Strand
A587-96(2001)	化學工業用電阻焊低碳鋼管	Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A588/A588M-04	高強度低合金結構鋼4英寸(100mm)厚屈服點較小為50ksi(345MPa)	Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick
A589-96(2001)	水井用無縫和焊接碳素鋼管	Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A591/A591M-98	薄鍍層電解鍍鋅薄鋼板	Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications
A592/A592M-04	壓力容器用經回火和淬火的高強度低合金鋼鍛制附件和零件	Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
A595-04	結構用圓錐形低碳鋼管	Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use
A596/A596M-95(1999)	用環形試驗法和沖擊法測定材料的直流磁性能的試驗方法	Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
A597-87(1999)	鑄造工具鋼	Standard Specification for Cast Tool Steel
A598/A598M-02	磁放大器磁芯的磁性能測試法	Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
A599/A599M-02	錫制品，電解鍍錫的冷滾軋薄板規范	Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A600-92a(1999)	高速工具鋼	Standard Specification for Tool Steel High Speed
A601-96(2000)	電解金屬錳	Standard Specification for Electrolytic Manganese Metal
A602-94(2004)	汽車用可鍛鑄鐵件	Standard Specification for Automotive Malleable Iron Castings
A603-98(2003)	鍍鋅結構鋼絲繩	Standard Specification for Zinc-Coated Steel Structural Wire Rope
A604-93(2003)	自耗電極再溶化鋼棒與鋼坯的宏觀腐蝕試驗方法	Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A606-04	改進防大氣腐蝕性的熱軋和冷軋高強度低合金鋼薄板和帶材	Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A608/A608M-02	高溫受壓離心鑄造的鐵鉻鎳高合金鋼管	Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
A609/A609M-91(2002)	碳素鋼,低合金鋼和馬氏體不銹鋼鑄件的超聲波檢測	Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A610-79(2000)	尺寸測量用鐵合金的取樣和試驗	Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
A612/A612M-03	中溫和低溫壓力容器用高強度碳素鋼板	Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
A615/A615M-04a	鋼筋混凝土配筋用變形和光面坯鋼筋	Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
A618-04	熱成型焊接和無縫高強度低合金結構鋼管	Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A623-03	錫軋制產品	Standard Specification for Tin Mill Products, General Requirements
A623M-03	鍍錫薄鋼板軋制品通用要求(米制)	Standard Specification for Tin Mill Products, General Requirements [Metric]
A624/A624M-03	錫輥軋制品.單壓延電解馬口鐵	Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A625/A625M-03	一次軋制原鋼板（未鍍）和鍍錫薄鋼板軋制產品技術規范	Standard Specification for Tin Mill Products, Black Plate, Single Reduced
A626/A626M-03	二次壓延電解鍍錫厚鋼板軋制品技術規范	Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A627-03	安全設備用均質不易加工的鋼棒	Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
A630-03	熱浸電解鍍錫板鍍錫層重量測定的方法	Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A632-04	通用無縫和焊接奧氏體不銹鋼管(小直徑)	Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A633/A633M-01	正火的高強度低合金結構鋼	Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A635/A635M-04e1	熱軋?zhí)妓劁摫“?span>,帶材和重型粗盤條規格	Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
A636-76(2000)	氧化鎳燒結塊	Standard Specification for Nickel Oxide Sinter
A638/A638M-00	高溫用沉積硬化鐵基**級合金棒,鍛件及鍛坯料	Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A640-97(2002)e1	8字型纜吊架用鍍鋅鋼絲繩	Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
A641/A641M-03	鍍鋅（電鍍）碳素鋼絲技術規范	Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A644-98(2003)	鐵鑄件的相關術語	Standard Terminology Relating to Iron Castings
A645/A645M-99a	壓力容器用經特殊熱處理的5%鎳合金鋼板	Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
A646-95(1999)	飛機及航空器鍛件用優質合金鋼大方坯及坯段	Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A648-04	預應力混凝土管用冷拉鋼絲	Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
A649/A649M-99(2003)	波紋紙機械用鍛制鋼輥規格	Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
A650/A650M-03	二次壓延的錫軋黑板材	Standard Specification for Tin Mill Products, Black Plate, Double Reduced
A653/A653M-04a	熱浸處理的鍍鋅鐵合金或鍍鋅合金薄鋼板的標準規范	Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A656/A656M-03	具有改良可模鍛性的高強度低合金熱軋結構鋼板	Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A657/A657M-03	一次和二次壓延電解鍍鉻黑鋼板軋制品技術規范	Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A659/A659M-97(2001)	商業級熱軋?zhí)妓劁摫“搴蛶Р?span>(較大含碳量為0.16%-0.25%)	Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
A660-96(2001)	高溫用離心鑄造碳素鋼管	Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A662/A662M-03	中溫和低溫壓力容器用錳碳鋼板規格	Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A663/A663M-89(2000)	商品級碳素鋼棒的機械特性	Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A664-99	在ASTM規范中對電工鋼和層壓鋼級別的識別	Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
A666-03	退火或冷加工的奧氏體不銹鋼薄板、帶材、中厚板和扁棒	Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A667/A667M-87(2003)	離心鑄造的雙金屬(灰口及白口鑄鐵)圓柱體	Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
A668/A668M-04	一般工業用碳素鋼和合金鋼鍛件	Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A671-04	常溫和較低溫用電熔焊鋼管	Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A672-96(2001)	中溫高壓用電熔焊鋼管	Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A673/A673M-04	結構鋼沖擊試驗的取樣程序	Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A674-00	水或其它液體用球墨鑄鐵管的聚乙烯包裝	Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A675/A675M-03	**熱軋?zhí)妓劁摪舻臋C械特性	Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A677/A677M-99	全處理型無取向電工鋼	Standard Specification for Nonoriented Electrical Steel Fully Processed Types
A678/A678M-00a	結構用經回火和淬火的高強度低合金碳素鋼板規格	Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
A679/A679M-00	硬(冷)拉高抗拉強度鋼絲	Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
A681-94(1999)	合金工具鋼	Standard Specification for Tool Steels Alloy
A682/A682M-02	彈簧用冷軋高碳鋼帶材	Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
A683/A683M-99	半處理型無取向電工鋼	Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
A684/A684M-86(2002)	冷軋高碳鋼帶材	Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A686-92(1999)	碳素工具鋼	Standard Specification for Tool Steel, Carbon
A688/A688M-03	焊接的奧氏體不銹鋼給水加熱器管	Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
A689-97(2002)	彈簧用碳素鋼及合金鋼棒	Standard Specification for Carbon and Alloy Steel Bars for Springs
A690/A690M-00a	在海洋環境中使用的高強度低合金工字形鋼樁和薄板樁規格	Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments
A691-98(2002)	高溫下高壓裝置用電熔焊碳素鋼和合金鋼管	Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
A693-03	沉淀硬化耐熱不銹鋼板、薄板和帶材	Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A694/A694M-03	高壓傳輸設備用碳素鋼及合金鋼管法蘭、配件、閥門及零件用鍛件	Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A696-90a(2000)	壓力管道部件**熱鍛或冷精軋?zhí)妓劁摪?/span>	Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A697/A697M-03	用伏特計、安培計和瓦特計法測定迭層鐵芯樣品的交流磁特性的試驗方法	Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
A698/A698M-02	在弱交流磁場中磁屏蔽效率的試驗方法	Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
A700-99e1	鋼制品國內裝運的包裝、標記和裝載方法	Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment
A701-96(2000)	硅錳鐵	Standard Specification for Ferromanganese-Silicon
A702-89(2000)	熱鍛鋼柵欄柱和組件	Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
A703/A703M-04a	受壓部件用鋼鑄件	Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A704/A704M-01	混凝土加筋用焊接普通鋼棒或桿的光面鋼筋或鋼筋網	Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A705/A705M-95(2000)	時效硬化的不銹和耐熱鋼鍛件	Standard Specification for Age-Hardening Stainless Steel Forgings
A706/A706M-04a	混凝土配筋用變形低合金光面無節鋼筋	Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
A707/A707M-02	低溫設備用鍛制碳素鋼和合金鋼法蘭	Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A709/A709M-04	橋梁用結構鋼	Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges


溫州亞仕密不銹鋼有限公司專注于不銹鋼管,不銹鋼無縫管,不銹鋼焊管等

• 詞條

  詞條說明

• ASTM A系列標準大全美國材料與試驗協會（五）

  A710/A710M-02 低碳時效硬化的鎳銅鉻鉬鈮合金鋼 Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates A711-04 鋼鍛件坯料 Standard Specifi

• 冷拔不銹鋼管表面質量缺陷

  1外折：在鋼管外表面上呈現螺旋形的片狀折疊，其螺旋方向與穿孔時鋼旋轉方向相反，且螺距較大，這種缺陷稱之為外折。 2.裂紋：在鋼管內外表面呈現連續或不連續的細小發狀，有的呈y形狀，其旋轉的方向與穿孔時鋼的旋轉方向相反且螺距較大，這種缺陷稱之為裂紋。 3.離層：在鋼管內表面出現螺旋形狀或塊狀的金屬分層或破裂或凸疤，這種缺陷稱之為離層。 4.內折：在鋼管的內表面出現螺旋形、半螺旋形，無規則分布的鋸齒狀

• ASTM A系列標準（一）

  標準號 中文名稱 英文 A1-00 碳素鋼丁字軌 Standard Specification for Carbon Steel Tee Rails A2-02 普通型,帶槽和防護型碳素工字鋼軌 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types A3-01 低、中、高碳素

• 201不銹鋼和304不銹鋼

  成分 201化學成分:(Cr)鉻:1350~15.0 (Ni)鎳:1.02-1.28% (C)碳:≤0.15 (Si)硅:≤0.75(Cu) 銅:半銅0.8% 高銅1.5% (Mn)錳:55~7.50 (N)氮:≤0.25 (P)磷:≤0.060 (S)硫:≤0.030 304化學成分:Ni(鎳):8.0~11.0 Cr(鉻):17.0~19.0 C(碳):≤0.07 si(硅):≤1.0 Mn