6ES7511-1FK02-0AB0

時間：2022-11-03作者：上海騰希電氣技術有限公司瀏覽：108

The CPU 1511F-1 PN has:




A powerful processor:
The CPU achieves a command execution time as low as 60 ns per binary command.

Extensive work memory:
230 KB for program, 1 MB for data

SIMATIC Memory Cards as load memory;
permit additional functions such as datalog and archives

Flexible expansion options: single-tier configuration with max. 32 modules (CPU + 31 modules)

Display with functions for




Display of overview information such as station name, higher level designation, location designation, etc.

Showing diagnostic information

Showing module information

Showing display settings

Setting IP addresses

Setting date and time

Switching the operating mode

Resetting the CPU to factory settings

Disabling/enabling the display

Enabling of protection levels

Display of safety mode, overall signature and date of the last download with signature change







PROFINET IO IRT interface for connecting distributed I/O via PROFINET

Supports PROFIsafe in centralized and distributed configuration




功能




Performance




Faster command processing, depending on the CPU type, lange extensions and new data types

Even shorter response times of the CPUs due to considerably faster backplane bus

Powerful network connection:
Each CPU is equipped with PROFINET IO IRT (2-port switch) as standard interface.







Integrated technology




Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)

Support of speed-controlled and positioning axes as well as external encoders

Trace functions for all CPU tags, both for diagnostics in real time and for sporadic error detection

Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality







Security Integrated




Password-based know-how protection against unauthorized read-out and modification of program blocks

Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted in the CPU.

4-level authorization concept:
Communication to operator panels can also be restricted.

Manipulation protection:
The controller recognizes changed or unauthorized transmissions of the engineering data.







Design and handling




Display of overview information:
E.g. Station name, plant designation, location identifier, etc., diagnostic information, module information, display settings.

Possible operations on the display:
Set addresses, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.







Integrated system diagnostics




System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, operator panels and web server, even for messages from the drives, and updated even if the CPU is in STOP mode.

Integrated in the firmware of the CPU, no special configuration is required







SIMATIC Memory Card (required for operation of the CPU)




Used as plug-in load memory or for updating the firmware.

Also for storing additional documents or csv files (for recipes and archives)

Creation of data blocks for storage/reading of data via SFCs of the user program







Datalog (archives) and recipes




Storage of csv files for recipes and archives on the SIMATIC Memory Card;
easy access to plant-relevant operating data using Office tools and via web server

Easy access to configuration data of the machine by means of a web browser or SD card reader (two-way data exchange from and to the PLC)







Programming of the standard program section




Programming as of STEP 7 V12 SP1







Programming of the fail-safe program section




Programming of the safety-related program section with the "STEP 7 Safety Advanced" option package. STEP 7 Safety Advanced V12 can run under SIMATIC STEP 7 Professional V12 SP1.














上海騰希電氣技術有限公司專注于西門子PLC,V90伺服,V20變頻器等, 歡迎致電 13681875601

• 詞條

  詞條說明

• 移植畫面和畫面對象 (WinCC V7)

  移植畫面和畫面對象 (WinCC V7)簡介移植到 WinCC 之后，將無約束地應用 WinCC V7 中可用的多數畫面對象。對于某些畫面對象，例如文本列表和狀態顯示，WinCC 內提供了可用的改進選項。這些對象可通過移植進行轉換，這樣不需要進行重做工作。WinCC 不再支持單個畫面對象，例如 WinCC Push Button Control。移植操作會盡可能將這些對象映射為 WinCC 中的可

• 為關聯 Teamcenter 的 TIA Portal 項目創建新的修訂版

  為關聯 Teamcenter 的 TIA Portal 項目創建新的修訂版要求需滿足以下要求：該 TIA Portal 項目已連接 Teamcenter。TIA Portal 項目不支持多選。操作步驟要為 Teamcenter 中保存的 TIA Portal 項目創建一個新的修訂版，請按以下步驟操作：在“項目樹”(Project tree) 視圖中，選擇相應的 TIA Portal 項目。右鍵單擊

• 移動無線電概述

  移動無線電概述提示只有與設備存在在線連接時才顯示該頁面。該頁面概括顯示設備當前的運行狀態。顯示值說明該頁面包含以下內容：IMEI顯示所用無線模塊的 IMEI 編號。IMEI（= International Mobile Equipment Identity，**移動設備識別碼）的分配具有**一性。SIM 狀態 (SIM Status)顯示 SIM 卡的狀態。-?存在 (present)

• NAT/NAPT 路由器與用戶特定*墻

  NAT/NAPT 路由器與用戶特定*墻之間的關系模塊特定的功能用戶特定*墻中的 NAT/NAPT 規則組態僅適用于 V3 及較高版本的 SCALANCE S 模塊。含義在創建 NAT/NAPT 規則后，STEP 7 在用戶特定*墻中自動生成用戶特定的 IP 規則集，啟用在組態的地址轉換方向上的通信。然后，可將用戶特定的 IP 規則集分配給單個或多個用戶，和/或分配給單個或多個角色（只適用于