I/O - Properties - X142

時間：2021-07-28

You can configure the following operating modes for the individual channels of the X142 interface:

列表: Overview of operating modes

Operating mode of X142 I/Os (8 channels)	Functionality	Use with technology objects (TOs)	Use via I/O area (without TO)	Isochronous mode
DI	Digital input Input delay (1 μs/125 μs) Hardware interrupt (optional) Hardware interrupt at rising and/or falling edge	Hardware limit switch for positioning and synchronous axes	No OB restrictions	Optional
DQ	Digital output	Output cam Cam track	No OB restrictions	Optional
Timer DI	Acquisition of the switching time of a digital input ** with up to two edges per application cycle (e.g. for use as measurement sensing input)	Measuring input (OB 91 required)	OB 91/OB 6x required	Required
Timer DQ	Precisely timed output of a digital output ** with up to two edges per application cycle (e.g. for use as an output cam output)	Output cam (OB 91 required) Cam track (OB 91 required)	OB 91/OB 6x required	Required
Oversampling DI	Acquisition of 32 states of a digital input ** at equal intervals per application cycle	---	OB 91/OB 6x required	Required
Oversampling DQ	Output of 32 states of a digital output ** at equal intervals per application cycle	---	OB 91/OB 6x required	Required
Event/period duration measurement	Measurement of number of edges and period duration (e.g. for simple speed measurement with hole mask and light barrier)	---	OB 91/OB 6x required	Required
Pulse width modulation PWM	Output of a configurable pulse-pause ratio with a configurable frequency	---	No OB restrictions	Optional

13681875601

詞條
詞條說明
OPC 輸入限值 EU Lo 和 EU Hi
輸入限值 EU Lo 和 EU Hi輸入測量值的容差范圍（下限值和上限值 EU Lo 和 EU Hi）在此可以*用于計算所選 OPC 項死區的限值（其含義見下文）。可以采用整數、浮點數或指數記數法（科學記數法）*數字值注意：使用“.”字符作為分隔符，而不要使用“,”字符。EU Lo（工程單位下限）下限EU Lo（工程單位下限）上限必須遵守下面的規則：EU Lo <= EU Hi如果輸入框
支持有計劃幀復制的介質冗余 (MRPD)
支持有計劃幀復制的介質冗余 (MRPD)MRP 擴展功能“支持有計劃幀復制的介質冗余”(MRPD)MRP 擴展功能“支持有計劃幀復制的介質冗余”(MRPD) 的優勢在于，環網中的某臺設備或線路發生故障時，其它所有設備可繼續使用 IO 數據而不會發生中斷且較新時間較短。MRPD 基于 IRT 和 MRP。要實現短較新時間的介質冗余，環網中的 PROFINET 設備需雙向發送數據。設備在兩個環網端口接
OPC UA 示例組態
OPC UA 示例組態以下部分介紹了如何使用客戶端接口編輯器和連接參數分配。說明基于特定示例：兩個 S7-1500 CPU 在系統中運行：一個 CPU 用作 OPC UA 客戶端，另一個用作 OPC UA 服務器。其它制造商生產的控制器、傳感器和 IT 系統當然也可用作 OPC UA 客戶端或服務器。特別值得一提的是，在不同系統之間進行數據交換（互操作性）是 OPC UA 的主要優點。使用示例說明
PerformanceMonitor V7.5
SIMATIC WinCC / PerformanceMonitor V7.5可立即交付使用。SIMATIC WinCC / PerformanceMonitor簡化了工廠特定關鍵績效指標（KPI）的靈活計算和強大分析。這些數字為開發優化潛力和提高生產率奠定了基礎。從現在開始，SIMATIC WinCC / PerformanceMonitor V7.5可用。升級和兼容性請注意，SIMATIC W