SIMATIC WinCC/SES V7.5

時間：2021-07-02

WinCC/SES supplements SIMATIC WinCC V7.5 with the functions of the Sequence Execution System

Product description

General:

WinCC/SES V7.5 (Sequence Execution System) is the option package of WinCC for sequential control of recipe-based and sequence-based processes.

WinCC/SES is especially suitable for production plants in which dosing, mixing and material transport are important process actions.

WinCC/SES supplements SIMATIC WinCC V7.5 with these functions

WinCC/SES offers easy changing of production parameters and production processes in Runtime without changing the PLC code.

Clear visualization of the production steps with the latest states.

Option for targeted intervention in the running process with manual jumps to a specific step or with automatic jumps as soon as a configured event occurs

Clearly structured comparison of actual values with setpoints for each individual step

Single-step mode in which the operator can switch to the next step independently.

WinCC/SES is especially suitable for production plants in which dosing, mixing and material transport are important process actions.

SIMATIC WinCC/SES V7.5 offers convenient configuration in the Configuration Studio

You can now keep multiple SES controls open at the same time.

SES V7.5 now gives you the option to define up to 200 steps in a sequence.

Control of up to 160 control elements per unit.

Up to 1000 parameters per sequence are now supported

SES V7.5 now supports up to 150 units.

Simultaneous saving of up to 5 sequences per unit in the PLC.

Exception handling (special sequences) is supported, which can be activated as soon as the Running state is changed to Holding, Resuming, Aborting, etc.

Compatibility

Note that SIMATIC WinCC/SES requires SIMATIC WinCC V7.5 as a basis.

WinCC/SES supplements SIMATIC WinCC V7.5 with the functions mentioned above.

In regard to configuration, WinCC/SES V7.5 has been released for the WinCC V7.5 operating system platforms

WinCC/SES WinCC/SES supports the following project types:

Configuration and Runtime are supported in the single-user system.

Configuration and Runtime are supported as follows in the multi-user system:

Project type	Configuration	Runtime
Server	Yes	Yes
Client without project	No	Yes
Client with project	No	Yes
Engineering System	Yes	Yes
Redundant server	No	No
Web Client	No	No

This is a limited release; for each order of the product the release of the Product Manager is requested by the planner.

Scope of delivery and ordering information

The licensing of the WinCC/SES option is based on the number of units that are controlled with WinCC/SES.

Two licenses are offered for WinCC/SES V7.5 which must be available on the server.

a) One basic license for up to two units
b) An extension license (countable) with which the basic license can be extended by five units each

Machine-readable product code	Article number
WinCC/SES V7.5 Sequence Execution System Basic Package (incl. 2 Units)	6AV6372-2DJ07-5AA0
WinCC/SES V7.5 Sequence Execution System Extension 5 Units	6AV6372-2BJ07-5BA0
WinCC/SES V7.5 Sequence Execution System Basic Package Upgrade V7.3 -> V7.5	6AV6372-2DJ17-5AA0
WinCC/SES V7.5 Sequence Execution System Basic Package Upgrade V7.4 -> V7.5	6AV6372-2DJ17-5AA1
WinCC/SES V7.5 Sequence Execution System Extension 5 Units Upgrade V7.3 -> V7.5	6AV6372-2BJ17-5BA0
WinCC/SES V7.5 Sequence Execution System Extension 5 Units Upgrade V7.4 -> V7.5	6AV6372-2BJ17-5BA1

13681875601

詞條
詞條說明
主機選項
主機選項在此頁面上* DHCP 服務器支持的 DHCP 選項。RFC 2132 中定義了各種 DHCP 選項。創建 IPv4 地址段后，會自動創建 DHCP 選項 1、3、6、66 和 67 。除了 DHCP 選項 1 以外，其它選項均可被刪除。在使用 DHCP 選項 １時，將自動設置您針對“DHCP 服務器”(DHCP Server) 中的地址段輸入的子網掩碼。在使用 DHCP 選項 3 時
函數代碼 05 — 寫單個線圈
函數代碼 05 — 寫單個線圈函數使用該函數可以設置或刪除從站中的各個位。位地址驅動程序不會檢查位地址參數，因此將參數原封不動的發出去。位狀態下列兩個數值可用作位狀態：FF00H = 設置位0000H = 刪除位SEND 源 DBSEND 源區域的結構：地址名稱類型初始值注釋+0.0地址BYTEB#16#5從站地址+1.0函數BYTEB#16#5函數代碼+2.0bit_addressWORDW#1
modbus 通信概述
modbus 通信概述Modbus RTU 通信Modbus RTU（遠程終端設備）是用于網絡中通信的標準協議，使用電氣 RS232 或 RS422/485 連接在網絡中的 Modbus 設備間進行串行數據傳輸。Modbus RTU 使用主/從站網絡，其中整個通信僅由一個主站設備觸發，而從站只能響應主站的請求。主站將請求發送到從站地址并且只有該從站地址響應該命令（例外情況：發送給從站地址 0、未被
環網冗余 MRP 互連
MRP 互連冗余環網連接在此頁面上創建、刪除和組態 MRP 互連。顯示框說明MRP 互連 (MRP Interconnection)選中此復選框以激活設備的 MRP 互連。只有在滿足以下條件時才可啟用 MRP 互連：-?已啟用環網冗余。-?將“MRP 管理器”或“MRP 客戶端”用作環網冗余方法。-?存在已激活的 MRP 互連。該表格包括以下列：選擇 (Select)