Delivery Release of SIMATIC WinCC/SES V7.5

時間：2020-09-01

WinCC/SES supplements SIMATIC WinCC V7.5 with the functions of the Sequence Execution System

Product description

General:

WinCC/SES V7.5 (Sequence Execution System) is the option package of WinCC for sequential control of recipe-based and sequence-based processes.

WinCC/SES is especially suitable for production plants in which dosing, mixing and material transport are important process actions.

WinCC/SES supplements SIMATIC WinCC V7.5 with these functions

WinCC/SES offers easy changing of production parameters and production processes in Runtime without changing the PLC code.

Clear visualization of the production steps with the latest states.

Option for targeted intervention in the running process with manual jumps to a specific step or with automatic jumps as soon as a configured event occurs

Clearly structured comparison of actual values with setpoints for each individual step

Single-step mode in which the operator can switch to the next step independently.

WinCC/SES is especially suitable for production plants in which dosing, mixing and material transport are important process actions.

SIMATIC WinCC/SES V7.5 offers convenient configuration in the Configuration Studio

You can now keep multiple SES controls open at the same time.

SES V7.5 now gives you the option to define up to 200 steps in a sequence.

Control of up to 160 control elements per unit.

Up to 1000 parameters per sequence are now supported

SES V7.5 now supports up to 150 units.

Simultaneous saving of up to 5 sequences per unit in the PLC.

Exception handling (special sequences) is supported, which can be activated as soon as the Running state is changed to Holding, Resuming, Aborting, etc.

Compatibility

Note that SIMATIC WinCC/SES requires SIMATIC WinCC V7.5 as a basis.

WinCC/SES supplements SIMATIC WinCC V7.5 with the functions mentioned above.

In regard to configuration, WinCC/SES V7.5 has been released for the WinCC V7.5 operating system platforms

WinCC/SES WinCC/SES supports the following project types:

Configuration and Runtime are supported in the single-user system.

Configuration and Runtime are supported as follows in the multi-user system:

Project type	Configuration	Runtime
Server	Yes	Yes
Client without project	No	Yes
Client with project	No	Yes
Engineering System	Yes	Yes
Redundant server	No	No
Web Client	No	No

This is a limited release; for each order of the product the release of the Product Manager is requested by the planner.

Scope of delivery and ordering information

The licensing of the WinCC/SES option is based on the number of units that are controlled with WinCC/SES.

Two licenses are offered for WinCC/SES V7.5 which must be available on the server.

a) One basic license for up to two units
b) An extension license (countable) with which the basic license can be extended by five units each

Machine-readable product code	Article number
WinCC/SES V7.5 Sequence Execution System Basic Package (incl. 2 Units)	6AV6372-2DJ07-5AA0
WinCC/SES V7.5 Sequence Execution System Extension 5 Units	6AV6372-2BJ07-5BA0
WinCC/SES V7.5 Sequence Execution System Basic Package Upgrade V7.3 -> V7.5	6AV6372-2DJ17-5AA0
WinCC/SES V7.5 Sequence Execution System Basic Package Upgrade V7.4 -> V7.5	6AV6372-2DJ17-5AA1
WinCC/SES V7.5 Sequence Execution System Extension 5 Units Upgrade V7.3 -> V7.5	6AV6372-2BJ17-5BA0
WinCC/SES V7.5 Sequence Execution System Extension 5 Units Upgrade V7.4 -> V7.5

13681875601

詞條
詞條說明
移植 OPC 的數據類型 (WinCC flexible)
移植 OPC 的數據類型 (WinCC flexible)移植數據類型 OPC在移植到 WinCC 的過程中，OPC 通信驅動程序的數據類型按如下方式進行映射：WinCC flexible 中的數據類型WinCC 中的數據類型BoolVT_BOOLByteVT_UI1CharVT_I1DateVT_DATEDoubleVT_R8DWordVT_UI4FloatVT_R4LongVT_I4Short
移植硬件 ID
移植硬件 ID通過硬件 ID 對模塊尋址如果程序?qū)τ布K尋址，例如在“LADDR”或“ID”參數中，那么這些地址在移植到新硬件后就會失效。必須更換這些地址。S7-1500 的硬件模塊通過硬件 ID 尋址。這意味著移植后必須在“LADDR”或“ID”參數中輸入新模塊的硬件標識符。為此，請按以下步驟操作：打開設備組態。選擇要尋址的模塊。在巡視窗口中選擇“屬性 > 系統常量”(Propertie
組態 SCALANCE M 硬件設備和系統功能
硬件設備和系統功能硬件的可用性下表列出了設備的硬件。我們保留進行技術更改的權利。?SCALANCE M874-2SCALANCE M874-3SCALANCE M876-3SCALANCE M876-4SCALANCE M812SCALANCE M816SCALANCE M826SCALANCE M804PB接口1 x SMA 天線連接器2?x?SMA 天線連接器1&
Configuring Timer DI operating mode
Configuring Timer DI operating modeTimer DITimer DI operating mode allows you to acquire the switching time of up to two edges per application cycle (for example OB?91, OB?6x), for example f