西門子S7-1500PS/PM供電模板連接頭

時間：2018-07-12作者：湖南迪碩自動化設備有限公司瀏覽：6

概述

• The CPU for standard and fail-safe applications with medium/high requirements for program/data storage in the S7-1500 controller product range
• Can be used for safety functions up to SIL 3 according to IEC 61508 and up to PLe according to ISO 13849
• High processing speed for binary and floating-point arithmetic
• Used as central controller in production lines with central and distributed I/O
• Supports PROFIsafe in centralized and distributed configuration 
• PROFINET IO IRT interface with 2-port switch
• PROFINET IO Controller for operating distributed I/O on PROFINET
• PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET I/O controller
• Isochronous mode

Note:
SIMATIC memory card required for operation of the CPU

應用

The CPU 1513F-1 PN is the CPU with a medium to large program and data memory for standard and fail-safe applications that also contain distributed automation structures alongside central I/O. It can be used as a PROFINET IO Controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as 2-port switch so that a linear topology can be set up in the system. In addition, the CPU offers comprehensive control functionalities as well as the ability to connect drives via standardized PLC-open blocks.

設計

The CPU 1513F-1 PN has:

• a powerful processor:
  The CPU achieves a command execution time as low as 40 ns per binary command.
• extensive RAM:
  450 KB for program, 1.5 MB for data
• SIMATIC Memory Cards as load memory;
  permit additional functions such as Datalog and Archive Flexible
• Expansion capability:
  single-tier configuration with max. 32 modules (CPU + 31 modules)
• Display with functions for the
  • Display of overview information such as station name, higher level designation, location designation, etc.
  • Display of diagnostic information
  • Display of module information
  • Display of display settings
  • Setting of IP addresses
  • Setting of date and time
  • Selection of the operating mode
  • Resetting of the CPU to factory settings
  • Disabling/enabling of the display
  • Enabling of protection levels
  • Display of safety mode, overall signature and date of the last download with signature change.
• PROFINET IO IRT interface for connecting distributed I/O via PROFINET
• Supports PROFIsafe in centralized and distributed configuration

功能

• Performance
  • Faster command processing, depending on the CPU type, language extensions and new data types
  • Even shorter response times of the CPUs due to considerably faster backplane bus
  • Powerful network connection:
    each CPU is equipped with PROFINET IO IRT (2-port switch) as standard interface.
• Integrated technology
  • Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)
  • Support of speed-controlled and positioning axes as well as external encoders
  • Trace functions for all CPU variables, both for diagnostics in real time as well as for sporadic error detection
  • Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality
• Security Integrated
  • Password-based know-how protection against unauthorized reading and modification of program blocks
  • Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted into the CPU.
  • 4-level authorization concept:
    Communication to the HMI devices can also be restricted.
  • Manipulation protection:
    The controller recognizes changed or unauthorized transmissions of the engineering data.
• Design and handling
  • Display of overview information:
    E.g. station name, plant identifier, location designation, etc., diagnostic information, module information, display settings.
  • Possible operations on the display:
    set addresses, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.
• Integrated system diagnostics
  • System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, HMI devices and Web server, even for messages from the drives, and updated even if the CPU is in STOP mode.
  • Integrated in the firmware of the CPU, no special configuration is required
• SIMATIC Memory Card (required for operation of the CPU)
  • Used as plug-in load memory or for updating the firmware.
  • Additionally for storing additional documents or csv files (for recipes and archives)
  • Creation of data blocks for storage/reading of data via SFCs of the user program
• Datalog (archives) and recipes
  • Storage of csv files for recipes and archives on the SIMATIC Memory Card;
    easy access to plant-relevant operating data using Office tools or via a Web server
  • Easy access to configuration data of the machine by means of a Web browser or SD card reader (two-way data exchange from and to the controller)
• Programming of the standard program section
  • Programming with STEP 7 V12 SP1
• Programming of the failsafe program section
  • Programming of the safety-related program section with the option package "STEP 7 Safety Advanced". STEP 7 Safety Advanced V12 can run under SIMATIC STEP 7 Professional V12 SP1.

湖南迪碩自動化設備有限公司專注于西門子代理商,長期回收西門子模塊,中國西門子代理商等

• 詞條

  詞條說明

• 西門子以太網水晶交換接頭

  本公司以質的服務，技術來滿足每一位來電的質詢的客戶，為達成我們之間的合作，不以利益為目的，只以長遠為目標，歡迎廣大客戶 來電垂詢; 上海非俗工控自動化設備有限公司（西門子合作伙伴） 聯系人? ：瞿章明（銷售工程師） 24小時服務咨詢熱線：132 1743 0013? 商務QQ????????&nbs

• 西門子6ES72882DE16OAAO

  品牌 SIEMENS/西門子 型號 6ES7288-3AE08-0AA0 結構形式 整體式 安裝方式 控制室安裝 LD指令處理器 硬PLC I/O點數 14 功能 模塊 工作電壓 24V 輸出頻率 63Hz 處理速度 11μs 程序容量 10 數據容量 30 產品認證 CE 環境溫度 -20-60℃ 環境濕度 30% 加工定制 否 重量 0.452kg 產地 德國 外形尺寸 10.50 x 10

• 西門子6ES7 331-7KF02-0AB0

  追求卓越，是我們?cè)诿總€(gè)業務都將盡力實現的目標。我們根據公司愿景制定這一遠大目標，并在其指引下提供優異的質量及追趕客戶需求的解決方案。一直如此。 追求卓越還意味著吸引市場上優秀的人才。我們將幫助這些人才掌握獲得成功所需的各種技能，給他們提供發揮潛力的**機會。我們致力于營造一種高績效企業文化。 追求卓越不僅僅關系到我們今天所做的一切，它還要求我們找到一條持續改善的道路。這需要我們靈活、積極地迎接變革

• 西門子6ES7231-7PD22-OXA8

  SIPLUS ET 200SP 的 SIPLUS CPU 1512SP-1 PN，基于 SIPLUS-S7-1500 CPU 1513-1 PN 適用于對程序范圍和處理速度具有中等要求的應用，通過 PROFINET IO 和 PROFIBUS DP 進行分布式配置。 增強了系統和設備的可用性 可用于較多 128 個 IO 設備的 PROFINET IO 控制器 PROFINET I-Device