西門子S7-1500AI8模擬量輸入模塊

時間：2018-07-12

概述

The CPU for standard and fail-safe applications with medium/high requirements for program/data storage in the S7-1500 controller product range
Can be used for safety functions up to SIL 3 according to IEC 61508 and up to PLe according to ISO 13849
High processing speed for binary and floating-point arithmetic
Used as central controller in production lines with central and distributed I/O
Supports PROFIsafe in centralized and distributed configuration
PROFINET IO IRT interface with 2-port switch
PROFINET IO Controller for operating distributed I/O on PROFINET
PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET I/O controller
Isochronous mode

Note:
SIMATIC memory card required for operation of the CPU

應用

The CPU 1513F-1 PN is the CPU with a medium to large program and data memory for standard and fail-safe applications that also contain distributed automation structures alongside central I/O. It can be used as a PROFINET IO Controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as 2-port switch so that a linear topology can be set up in the system. In addition, the CPU offers comprehensive control functionalities as well as the ability to connect drives via standardized PLC-open blocks.

設計

The CPU 1513F-1 PN has:

a powerful processor:
The CPU achieves a command execution time as low as 40 ns per binary command.
extensive RAM:
450 KB for program, 1.5 MB for data
SIMATIC Memory Cards as load memory;
permit additional functions such as Datalog and Archive Flexible
Expansion capability:
single-tier configuration with max. 32 modules (CPU + 31 modules)
Display with functions for the
- Display of overview information such as station name, higher level designation, location designation, etc.
- Display of diagnostic information
- Display of module information
- Display of display settings
- Setting of IP addresses
- Setting of date and time
- Selection of the operating mode
- Resetting of the CPU to factory settings
- Disabling/enabling of the display
- Enabling of protection levels
- Display of safety mode, overall signature and date of the last download with signature change.
PROFINET IO IRT interface for connecting distributed I/O via PROFINET
Supports PROFIsafe in centralized and distributed configuration

功能

Performance
- Faster command processing, depending on the CPU type, language extensions and new data types
- Even shorter response times of the CPUs due to considerably faster backplane bus
- Powerful network connection:
  each CPU is equipped with PROFINET IO IRT (2-port switch) as standard interface.
Integrated technology
- Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)
- Support of speed-controlled and positioning axes as well as external encoders
- Trace functions for all CPU variables, both for diagnostics in real time as well as for sporadic error detection
- Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality
Security Integrated
- Password-based know-how protection against unauthorized reading and modification of program blocks
- Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted into the CPU.
- 4-level authorization concept:
  Communication to the HMI devices can also be restricted.
- Manipulation protection:
  The controller recognizes changed or unauthorized transmissions of the engineering data.
Design and handling
- Display of overview information:
  E.g. station name, plant identifier, location designation, etc., diagnostic information, module information, display settings.
- Possible operations on the display:
  set addresses, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.
Integrated system diagnostics
- System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, HMI devices and Web server, even for messages from the drives, and updated even if the CPU is in STOP mode.
- Integrated in the firmware of the CPU, no special configuration is required
SIMATIC Memory Card (required for operation of the CPU)
- Used as plug-in load memory or for updating the firmware.
- Additionally for storing additional documents or csv files (for recipes and archives)
- Creation of data blocks for storage/reading of data via SFCs of the user program
Datalog (archives) and recipes
- Storage of csv files for recipes and archives on the SIMATIC Memory Card;
  easy access to plant-relevant operating data using Office tools or via a Web server
- Easy access to configuration data of the machine by means of a Web browser or SD card reader (two-way data exchange from and to the controller)
Programming of the standard program section

詞條
詞條說明
6ES7135-6GB00-0BA1
CPU 1510SP-1 PN 適用于基于 S7-1500 CPU 1511-1 PN 的 SIMATIC ET 200SP 用于基于 ET 200SP 的高性能控制解決方案增強了系統和設備的可用性可連接較多 64 個 IO 設備的 PROFINET IO 控制器 PROFINET I-Device，用于連接作為智能 PROFINET 設備、帶 SIMATIC 或第三方 PROFINET I
西門子6ES7216-2AD23-OXB8
SIMATIC ET 200SP 可擴展的 SIMATIC ET 200SP I/O 系統是防護等級為 IP20 的高度靈活的模塊化 I/O 系統。通過具有 PROFINET 或 PROFIBUS 接口的接口模塊，它可以與較**控制系統交換所連接 I/O 模塊的 IO 數據?；蛘撸跃o湊型 S7-1500 控制器（分布式控制器）的形式提供了各種 PLC、F-PLC 和開放式控制器，作為其它首尾站
西門子6ES72881ST600AA0
西門子6ES7288-1SR20-OAAO 西門子6ES7288-1SR20-OAAO 西門子6ES7288-1SR20-OAAO 品牌 SIEMENS/西門子型號 6ES7288-1SR20-0AA0 結構形式模塊式安裝方式現場安裝 LD指令處理器硬PLC I/O點數 11 功能模塊工作電壓 24V 輸出頻率 63Hz 處理速度 1.7μs 程序容量 10 數據容量 13 產品認證
玉林西門子PLC總代理
??我公司是一家專業銷售，維修西門子工業自動化產品，團隊成立十幾年，憑借高**的技術和專業的服務！一致得到客戶的**！歡迎來電質詢高品質西門子產品！歡迎來電質詢高品質西門子自動化產品；聯系人 ? ? ? ? ? ?：瞿章明（銷售工程師）聯系電話： ? ? ? ?：132