Application of wireless temperature measurement products in a power distribution project in Malaysia

時間：2021-12-10作者：安科瑞電子商務（上海）有限公司瀏覽：137

朱鹍

安科瑞電氣股份有限公司上海嘉定

Abstract: The power distribution system is a power network system that is composed of a variety of power distribution equipment and power distribution facilities to transform voltage and directly distribute electrical energy to end users. As a part of the power system, the power distribution system directly faces end users, and its perfection directly affects the reliability and quality of power consumption of the majority of users, so it has an important position in the power system. Therefore, in order to avoid serious accidents such as equipment aging, equipment burnout, power supply interruption, fire and explosion of equipment due to high temperature, long-term temperature monitoring of each electrical node can avoid serious failures that may cause personal injury and economic loss to users.

 

Keywords: Wireless temperature sensor, wireless temperature monitoring system, 433Mhz wireless temperature sensor

 

1. Project Overview

    This project is an application in a distribution room in Malaysia. It is used in a 33kV switchboard and needs to be equipped with wireless temperature measurement products to achieve safe temperature monitoring. The size of the copper bar is 10mm×130mm. Choose our ATE400 CT powered temperature sensor, and use ATC450 transceiver to connect to the display device. The RS485 communication data is transmitted to the customer platform for real-time monitoring, which can effectively prevent overheating failures, affecting the normal operation of the equipment, and avoiding potential safety hazards. For the sake of safety and economic benefits, it is recommended to conduct real-time temperature monitoring at each electrical node in the power distribution room.

2.Introduction of Wireless Temperature Measurement Product

    Acrel on-line temperature measurement device is suitable for the temperature detection of high and low voltage switches, circuit breaker contacts, high voltage cable middle heads, low voltage and high current equipment, to prevent contact caused by oxidation, loosening and other factors during operation Excessive contact resistance and heat generation become a safety hazard, timely, continuous and accurate reflection of equipment operating status, and equipment safety.

 

3.Features of Wireless Temperature Monitoring System

(1) The wireless temperature measurement module is safe and reliable, and easy to install and maintain. It is suitable for temperature monitoring at the high voltage and high current contacts of the middle switch. The structure of the device under test does not need to be changed.

(2) The entire wireless temperature measurement system can communicate wirelessly, and the ** transmission is convenient.

(3) The wireless temperature measurement system has strong anti-interference ability, and its anti-interference ability against pulse interference, fast transient interference, electrostatic radiation, electromagnetic field radiation, etc. has reached the national four-level standard, and the operation of the equipment does not affect the opening and closing of the medium voltage switch Operation and protection device actions.

(4) Application in industry (coal, steel, petroleum, chemical), power plants, schools, hospitals, municipal construction, transportation facilities (airports, railway stations), commercial buildings, convention and exhibition centers, photovoltaic power generation, new energy and other fields.

 

4. Wireless Temperature Monitoring Solution

4.1 Wireless temperature sensor

4.1.1 Wireless temperature sensor by CT sensing  

ATE400                                 

·Small size;

·Wireless transmit;

·Wireless transmission distance, 150 meters;

·Fase sampling frequency,15s;

·CT-powered, more than 5A starting current;

·Widely temperature measuring range, -40℃~125℃.

 

4.1.2 Wireless temperature sensor powered by battery

1) ATE200

·Wireless transmit;

·Wireless transmission distance, 150m;

·Fase sampling frequency, 25s;

·Battery -powered, more than 5 years;

·Widely temperature measuring range, -40℃~125℃.




ATE100

·Wireless transmit;

·Wireless transmission distance, 150m;

·Fase sampling frequency, 25s;

·Battery -powered, more than 5 years;

·Widely temperature measuring range, -40℃~125℃. 

 

ATE100M

·Wireless transmit;

·Wireless transmission distance, 150m;

·Fase sampling frequency, 25s;

·Battery -powered, more than 5 years;

·Widely temperature measuring range, -40℃~125℃.

 

4.2  Receiver/Display Unit

4.2.1 Receiver

1)ATC600-C

·Wireless transceiver;

·Maximum measuring 240 points;

·1 RS485 serial communication, Modbus-RTU;

·2 alarm relays;

·Power supply adapt with AC/DC220V, AC/DC110V.



2)ATC450-C                                                                                                                                                                          

·Wireless transceiver;                                    

·Maximum measuring 60 points;                       

·1 RS485 serial communication, Modbus-RTU;

·Power supply adapt with DC24V

 

4.2.2 Display Unit

1) ARTM-Pn

·Wireless temperature measurement, maximum measuring 60 points;

·U, I, P, Q, f, Ep, Eq measurement；

·4 digital inputs;

·2 alarm relays;

·LCD display;

·Power supply adapt with AC220V, DC220V, DC110V, AC110V;

·1 RS485 serial communication, Modbus-RTU.

 

5.Typical Connection

  

6.Application

 

7. Photos on Site

 

Bibliography

1.Solutions For Enterprise Micro-grid System 2020.02

作者簡介：

朱鹍，女，就職于安科瑞電氣股份有限公司，主要研究方向?yàn)槠髽I(yè)能源管控

：     手機：     QQ：


安科瑞電子商務（上海）有限公司專注于變電所運維云平臺,安全用電管理云平臺,環保用電監管云平臺等, 歡迎致電 15000353138

• 詞條

  詞條說明

• 淺談能源管理信息化建設的實踐與實現

  ?朱鹍安科瑞電氣股份有限公司 上海嘉定 201801摘要：文章對企業能源管理信息化建設的主要內容進行了較為詳細的闡述，在此基礎上，探討了企業能源管理信息化系統的組成結構以及其與其他企業信息化系統（如ERP、MES、PCS）的關系。關鍵詞：能源管理；信息化；管理系統1.背景? ? ? ? 能源是支撐整個世界運行、發展的重要物質基礎。隨著我國社會經濟的

• 馬達保護器在礦山電機控制系統中的選型與應用

  朱鹍安科瑞電氣股份有限公司?上海嘉定20180?摘要：近年來，隨著電子技術、計算機技術、總線技術的*發展，智能馬達保護器以其優越的性能逐漸替代傳統的熱繼電器成為電動機保護及綜合控制的發展趨勢。礦山電機系統中存在大量的大功率交流異步電機，其運行工況對電機控制及保護系統提出了較高的要求。在介紹了智能馬達保護器原理功能和選型的基礎上，深入探討了智能馬達保護器在礦山電機控制系統的綜合

• 安科瑞智慧消防管理云平臺在社會消防單位管理中的應用分析

  安科瑞智慧消防管理云平臺在社會消防單位管理中的應用分析朱鹍安科瑞電氣股份有限公司? 上海嘉定? ? ?201801摘要 ："智慧消防"的應用縮減了消防工作的管理成本，改善了傳統管理的弊病問題，同時帶來了消防設施智能化管理變革，優化配置了消防安全管理資源。智慧消防在社會消防單位中應用和推廣，建立消防智能化發展思路，實現信息資源實時形成戰斗力，改變束縛消防工作的

• 在接線松動時火災預防中應用了限流式保護器的關鍵性

  【關鍵詞】接線松動；電氣火災；過載1事故經過? ? ? ? 2018年8月5日的微山湖畔，正值高溫天氣，炙熱烤人，家用空調制冷用電能量激增。15時18分，當?shù)毓╇姽緭屝拗笓]班接到電話，某一臺區計量箱起火，火勢正在蔓延。搶修指揮班立即向轄區供電所下發派工單。供電所立即出動搶修人員，經3 h搶修恢復了供電。2事故排查? ? ? &