Medical Isolated Power Supply System in Angola

時間：2021-03-23作者：安科瑞電子商務（上海）有限公司瀏覽：67

朱鹍
安科瑞電氣股份有限公司  上海嘉定



Abstract: Diagnosis and treatment in modern hospitals are inseparable from advanced medical equipment, which are inseparable from safe and reliable power supply. Many operations often last for several hours, and the consequences of a sudden power failure during the operation are unimaginable. At the same time, many medical devices directly touch or penetrate into the human organs. At this time, the very small leakage current will threaten the life of the patient. Therefore, the national standards have made clear requirements, medical group 2 locations must be powered by IT system. This article introduces the application of Acrel Medical IT System in Luanda General Hospital, Angola.

 

Keywords: Medical IT system, Insulation monitoring device, Alarm indicators.  

 

1.Project Overview

Luanda General Hospital in Angola is a China-aided reconstruction and expansion project of Luanda General Hospital in Angola undertaken by China Railway Fourth Bureau. The project uses 8 sets of Acrel medical IT system products. They are AITR series isolation transformer, AKH-0.66P26 current transformer, AIM-M series insulation monitoring device, AID series remote alarm indicator and DC power supply unit.

 

2.Introduction of Medical Isolated Power Supply System

The medical isolated power supply system is to switch the grounding system (TN-S system) into ungrounded system (IT system) through a medical isolation transformer to supply power for important medical equipment. The insulation monitoring device has the function of insulation monitoring and fault locator has the function of fault circuit locating.

 

3.Acrel Medical Isolated Power Supply System Solutions

Acrel medical isolated power supply system is suitable for operating room, ICU, CCU and other medical group 2 locations providing safe and uninterruptible power supply. It mainly includes AITR series isolation transformer, AKH-0.66P26 current transformer, AIM-M series insulation monitoring device, AID series remote alarm indicator, DC power supply, ASG series test ** generator and AIL series insulation fault locator.

 

3.1Acrel Medical Isolated Power Supply System for Operating Room

 

Option I  without insulation fault location function

 

 

Option II  with insulation fault location function

Note: 1. For operating room, AID series alarm indicator should be installed on the intelligence panel inside the operating room, or next to the intelligence panel (wall mounted installation) so that medical personnel can immediately receive a notification when there is power supply failure.

          2. In Option II，if the number of located channels is more than eight，two sets of AIL150 can be used. The combination can be AIL150-8 and AIL150-4 (up to 12 channels), or AIL150 -8 and AIL150-8 (up to 16 channels).

 

3.2Acrel Medical Isolated Power Supply System for ICU and CCU  ICU,CCU

 

Option I  without insulation fault location function

 

 

Option II  with insulation fault location function

Note: For intensive care unit , AID series alarm indicator should be installed in the nurses 'station so that medical personnel can monitor the operating status of isolated power supply system.

 

3.3Product Selection

 

4.Connection Diagram

 

5.Installation Photos

 

6.Conclusion

After expansion and reconstruction, Luanda General Hospital has become the largest hospital in Angola. The Acrel medical IT system provides safe and realible power supply for hospitals,  effectively improving the local medical conditions and benefiting the local people.

 

Bibliography

1.IT System Insulation Monitoring Device and Fault Location System of Acrel. 2020

2.IEC 60354-7-710: 2002 Electrical installations of buildings-Part 7-710:Requirements for special installations or locations - Medical locations. 2002

3.IEC 61558-1-15:2011 Safety of transformers, reactors, power supply units and combinations thereof-Part 2-15: particular requirements and tests for isolating transformers for the supply of medical locations. 2011

作者簡介：
朱鹍，女，就職于安科瑞電氣股份有限公司，主要研究方向?yàn)槠髽I(yè)能源管控


安科瑞電子商務（上海）有限公司專注于變電所運維云平臺,安全用電管理云平臺,環保用電監管云平臺等, 歡迎致電 15000353138

• 詞條

  詞條說明

• 電力監控系統在煤礦井下配電管理中的設計與應用

  摘要：目前煤礦井下電力系統發生了各種各樣的創新和變化。部分礦井使用較高的功率和配電電壓較高的電氣開關設備，通常使用可編程邏輯控制器(PLC)進行控制、監控和診斷應用，使用內置測試電路改進繼電保護，在負載附近進行功率因數校正，以改進電壓調節以及修改電力系統部件布置。電力監控系統是由于工作面設備(尤其是長壁設備)的功率需求顯著增加所需要的。監測系統主要目的是改善動力系統的運行特性，提高了礦井生產安全性

• 淺談無線測溫系統的設計與實現

  淺談無線測溫系統的設計與實現朱鹍安科瑞電氣股份有限公司 上海嘉定 2018012.2主控芯片選型? ? ? ?從溫度感知單元采用鋰電池供電，為了延長電池的使用時間及減少從溫度感知單元的維護工作，從溫度感知單元采用低功耗MCU。MCU為STM8L系列的STM8L052R8[8-9]，該芯片在運行模式下，功耗低至200μA/MHz；提供五種低功耗模式，在低功耗

• 陽光東尚S5地塊智能照明控制系統的設計和應用

  朱鹍安科瑞電氣股份有限公司，上海 嘉定 201801；摘要：本文以安科瑞智能照明系統在陽光東尚S5地塊的應用為案例，介紹智能照明系統實現對現場設備的系統集成，數據的采集、傳輸以及存儲，驗證了該系統的功能及實用性。關鍵詞：陽光東尚S5地塊；智能照明1 概述??????? ASL1000智能照明監控系統，采用與KNX兼容的Acrel

• 淺談配電室環境智能監控系統在六安配網建設中的應用

  朱鹍安科瑞電氣股份有限公司?上海嘉定201801摘要：配電室內溫濕度等環境因素直接影響到室內設備的安全可靠運行，結合六安配網配電室管理現狀介紹了環境智能監控系統建設的可行性，詳細闡述了系統試點建設方案。實踐證明該方案實現了配電室運行環境實時監測和遠程控制調節，提高了配電室運行的安全性和可靠性，帶來了良好的安**益、經濟效益和社會效益。關鍵詞：配電室；環境；實時監測；遠程控制0引言&nbs