Application of Acrel Hall Sensor in Chile

時間：2021-12-20作者：安科瑞電子商務（上海）有限公司瀏覽：256

朱鹍

安科瑞電氣股份有限公司上海嘉定

Abstract:This article introduces the application of the Hall Sensor used in chile. Hall current sensors are mainly used to isolate and convert AC, DC, pulse and other complex **s. After ** control of current **s are converted according to the Hall Effect Theory, they can be directly acquired by AD, DSP, PLC, secondary instruments and other devices. Hall current sensors are widely applicable for acquisition and feedback in the current monitoring, battery application, inverter, solar power management, direct current cabinet, DC motor drive, electroplating, welding, frequency converter, UPS servo control systems. They feature the quick response, wide range of measurement, high precision, strong overload capacity, good linearity and excellent anti-interference performance.

 

1. Project overview:

    The company that do lithium batteries need to use DC Hall sensors to transmit DC current to the 4-20mA analog ** output. After confirming the input and output and working power, the customer chose AHKC-EKA and AHKC-EKAA.

 

2.Advantages of open type Hall sensor

   Compared with the traditional DC current measurement method generally adopted by shunt or transformer, the open-type Hall sensor has the following advantages:

1) High insulation strength of primary side and secondary side, up to AC 12KV isolation;

2) No insertion loss;

3) Good dynamic performance: the response time is less than 20uS and the tracking speed Di /dt is higher than 20A/ uS

4) There is no need to disassemble the original side cable or bus during installation. It is especially suitable for the transformation and construction of equipment that is not allowed to lose power.

 

3.Product Selection

 

4.Application

    Hall current sensor is mainly used in factory transformation of DC power distribution system, photovoltaic, UPS, motor system, etc. It can convert the primary DC current ** in the system into a standard DC ± 5V or 4-20mA output, which plays a role in monitoring and electrical isolation , It can be used with multi-loop monitoring instruments or other electrical measuring instruments.

5.Conclusion

   Open-end Hall current sensor plays an important role in the application of DC system because of its simple structure, convenient installation, reliable operation .

 

6.Bibliography

1.Solutions For Enterprise Micro-grid System 2021.04

作者簡介：

朱鹍，女，就職于安科瑞電氣股份有限公司，主要研究方向為企業能源管控

：     手機：     QQ：


安科瑞電子商務（上海）有限公司專注于變電所運維云平臺,安全用電管理云平臺,環保用電監管云平臺等, 歡迎致電 15000353138

• 詞條

  詞條說明

• 淺談電氣火災成因及對策分析

  朱鹍安科瑞電氣股份有限公司? 上海嘉定? 201801?摘要：隨著現代化進程不斷，電力能源在我國國民生活中的重要性與日俱增。伴隨而來，一些電氣原因造成的建筑火災等事故也屢屢發生，給國民的財產和造成巨大損失。本文由此從施工過程以及用電管理等方面對電氣火災的成因進行綜合分析，并針對各方面的原因提出對策，以便參考。關鍵詞：電氣火災；形成原因；對策參考1電氣火災成因分析&nb

• 安科瑞醫用隔離電源系統在南陽醫學高等?？茖W校一附屬醫院中的應用

  朱鹍安科瑞電氣股份有限公司，上海 嘉定 201801；?摘要：?介紹該南陽醫學高等?？茖W校一附屬醫院采用安科瑞醫用隔離電源系統，使用配電柜安裝方式，從而實現將TN系統轉化為IT系統，以及系統絕緣情況監測。關鍵詞：醫用隔離電源系統；IT系統；絕緣情況監測；?0 概述????? 本建設項目為南陽醫學高等專科學校一附屬醫院綜

• 淺談大空間移動式智慧消防報警滅火系統設計分析

  朱鹍安科瑞電氣股份有限公司? 上海嘉定201801摘要：文章主要針對高大空間建筑，分析了火災發生初期如何實現報警與滅火。通過借助設置在建筑*分區內的火警探測器與軌道式、地面式及無人機智慧滅火機器人，能夠在火災影響范圍不大的情況下，及時發現火災著火點，并*撲滅，從而減少人員和財產損失。同時，在報警與滅火的過程中，智慧滅火機器人把相關數據資料和圖像監視資料遠傳至消防控制室與城市管理，方便

• 章丘南外環隧道項目電力監控系統的研究與應用

  ?朱鹍安科瑞電氣股份有限公司? ?上海 嘉定 201801?摘要：采用多功能電力儀表、微機保護裝置采集高壓配電柜的各種電參量和開關信號。系統采用現場就地組網的方式，通過RS485線遠傳串口服務器，再通過網線至后臺，通過Acrel-2000Z型電力監控系統實現配電所配電回路用電的實時監控和管理。關鍵詞：?Acrel-2000Z;電力監控系統;&nbs