安科瑞IoT電能管理系統性解決方案在馬來西亞某工廠的應用

時間：2021-12-16

1. 應用場景Application Scenario

對工廠的三相用電設備的用電量進行采集并上傳至系統，從而使用戶能夠實現在PC上就能通過IoT EMS系統查看設備用電情況。

Customers need to collect the basic energy consumption data and upload it to management system so that they can realized real-time and remote data monitoring using their PC.

2. 技術選型 Technical Selection

2.1三相回路電壓為415Vac L-L，額定電流不**過80A AC，三相四線接線，電表方面選型三相帶RS485（MODBUS-RTU）通訊的電表ADL400。

Rated voltage of 3-phase monitoring circuits is 415Vac L-L while the rated current is below 80A AC, thus selection of metering devices will be ADL400 3-phase energy meter with RS485 communication of MODBUS-RTU protocol

2.2工廠經確認后WiFi覆蓋條件較好，頻段為2.4GHz，方便提供220Vac供電，網關選用AWT100-WiFi搭配POW模塊。支持廣播自動抄表以便后續下行設備的添加。該網關上行為4GHz WiFi，采用MODBUS-RTU over TCP的透傳通訊協議。下行為RS485通訊，采用MODBUS-RTU協議，從而與ADL400配合對數據進行上傳至云服務器通向系統。

After discussing with the customer, factory is with stable 4GHz WiFi coverage and **,and a power supply of 220Vac is preferable. So, for the gateway parts, we select AWT100-WiFi which own auto-broadcasting function that can ease the later adjustment with subsequent ADL400. Also, AWT100-WiFi is paired with AWT100-POW power module.Other than that, since AWT100-WiFi is with upstream of 2.4GHz WiFi using MODBUS-RTU over TCP protocol and downstream of RS485 using MODBUS-RTU protocol to be paired with ADL400 for energy consumption data uploaded to cloud server and finally to the IoT System.

2.3測試階段服務器使用我司已經租用的亞馬遜云服務器以節省客戶預算。

For pilot project phase, cloud server is highly recommended to use our company’s cloud server which has been rent on Amazon to save the customers’ budget on testing phase.

2.4根據需求系統選用IoT EMS系統，并提供3個月試用以便客戶測試。

According to the request, IoT Energy Management System will be the most appropriate one and can provide 3-month free trial for testing use.

3. 初期方案架構Pilot Project Solution Structure

4. 后期方案方向 Plan after Pilot Project

若初期方案測試成功，后期方案方向為：

If pilot project proved to be successful, later plan should be as below:

4.1云托管方案：綜合考慮云服務器租用成本以及點位數量不多的情況，云方案推薦為系統軟件選用托管，云服務器依舊使用我司的云服務器。硬件設備層*改動，只需后續增訂ADL400三相電能表，若點位數量需求較多，根據情況配套增訂AWT100-WiFi網關。

Cloud Hosting Service Solution: Considering about the comprehensive cost of renting the cloud server and the amount of monitoring circuits, deployment of cloud IoT Energy Management System should be paired with hosting service. In this situation, customer don’t need to afford the rent of cloud server and will use our own cloud server. Also, for the hardware of this solution, no change need be done just like in the pilot project solution structure. Customer only need to order more ADL400 3-phase energy meter and maybe paired AWT100-WiFi gateway according to the number of subsequent request.

4.2本地買斷方案：若客戶對數據保密性比較有想法，后期推薦方向為IoT系統買斷服務，服務器架設本地服務器并搭配工業交換機與UPS電源。硬件設備層電表依舊推薦ADL400，特殊型號ADF400L不推薦使用，原因是在三相四線接線為直通式接線而非互感器接入時，ADF400L的測量模塊需求數量較多，無法減少成本。網關方面根據后期點位數量增配AWT100-CE或者APort100.

Local Buy-out Service Solution: If request from customers for data safety and Confidentiality is much more higher. The buy-out service of IoT Energy Management System to be paired with a Local Server will be the best choice. Yet the solution need to do a lot of change in hardware like. First, deploying of local server need to be paired with industrial switch and UPS. Second, for energy meter, ADL400 is still more recommendable.Since the special module, ADF400L Multi-circuit energy meter with built-in Ethernet communication won’t save much budget on the application of 3-phase wiring via direct connection instead of via CTs. At last, gateway need to be changed from AWT100-WiFi to AWT100-CE or Aport100 according to the amount of subsequent request.

5. 后期方案架構 (僅指采用本地方案的情況下) Late-stage Solution Structure （For local solution only）

詞條
詞條說明
青島土木建筑工程學會建筑電氣專業**2021學術年會
2021年10月29日，為期一天的青島市土木建筑工程學會建筑電氣專業**2021學術年會在美麗的海濱城市青島隆重召開。安科瑞受邀參會！本次會議主要由建筑電氣學術交流及建筑電氣產品展會兩個部分。會議期間主要回顧以往，展望未來，答疑解惑，學會*廣泛聽取各方意見，并針對建筑電氣技術及產品的發展歷程、趨勢以及應用領域等內容，進行細致的講解，大會現場高朋滿座，與會觀眾認真聆聽。通過本次會議，安科瑞與青
多功能電表怎么看
1.尖峰時期是用電量高的時間，用電用戶多，用電量大。電網會出現出現供電不足，系統頻率下降，這個時段大約在早8----晚5出現。2.平是在用電量，在正常合理的使用，電網供電充足，頻率穩定，這個時段一般在晚5----晚9出現。3.谷，就是夜間低谷，電網會出現電能過剩，頻率上升，同樣會造成不平衡，導致供電系統失去經濟，合理性這個時段一般在晚9---早7點出現。上述就是為你介紹的有關多功能電表怎么看&nb
山東省建筑電氣與智能化2024年常務理事會
2024年4月16日，由山東省勘察設計協會建筑電氣、山東土木建筑學會建筑電氣、山東省智能建筑技術、山東省建筑電氣技術情報網主辦的2024 年常務理事會在山東省菏澤市順利召開。安科瑞受邀參會，做分享交流、展示推廣。山東省建筑電氣“三會一網”負責人張釗主持開幕式，山東省公共資源交易，菏澤市，菏澤市住建局出席會議為大會致開幕辭，對大會召開表示祝賀；山東省勘察設計協會發表致辭，對與會、嘉賓的蒞臨表示歡迎和
金寨嘉悅電池片項目電力監控系統的設計與應用
摘要：介紹金寨嘉悅電池片項目電力監控系統，采用綜合保護裝置、多功能儀表、變壓器溫控儀、直流屏，采集配電現場的各種電參量和狀態信號。系統采用現場就地組網的方式，組網后通過現場總線通訊并遠傳至后臺，通過安科瑞電力監控系統實現變電所變配電回路用電的實時監控和管理。關鍵詞：龍湖蘇地2013-G-18號地塊五期項目；10KV變配電所；綜合保護裝置；Acrel-2000；電力監控系統。0?概述金寨嘉