安科瑞防逆流電表在菲律賓光伏項目的應用

時間：2021-11-07作者：江蘇安科瑞電器制造有限公司瀏覽：143

1.項目背景Background

隨著光伏行業的發展，部分地區村級變壓器及工業用電變壓器容量與光伏項目的裝機容量處于飽和。電網公司要求對后建的光伏并網系統為不可逆流發電系統，指光伏并網系統所發生的電由本地負載消耗，多余的電不允許通過低壓配電變壓器向上級電網逆向送電。

With the development of photovoltaic industry, the capacity of village-level transformers and industrial power transformers and the installed capacity of photovoltaic projects are saturated in some areas.The power grid company requires the photovoltaic grid-connected system to be a non-backflow current generation system, which means that the electricity generated by the photovoltaic grid-connected system is consumed by the local load, and the excess electricity is not allowed to be sent to the upper power grid through the low-voltage distribution transformer in reverse direction.

光伏逆變器在將光伏組件產生的直流電變換成交流電時，會夾雜有直流分量和諧波，三相電流不平衡，輸出功率不確定性等，目前基本沒有采取有效的治理手段，因此，當有發電功率送往公用電網時，就會對電網產生諧波污染，易造成電網電壓波動，閃變等，如果有許多這樣的發電源向電網輸電時，會導致電網電能質量嚴重下降。所以這類光伏發電系統必須配套加裝防逆流設施，來防止逆功率的發生。

Photovoltaic inverter in photovoltaic components will produce direct current into alternating current (ac), has the dc component and harmonic mixing, unbalanced three phase current, output power of uncertainty, such as the current basic didn't take effective management measures, therefore, when there is power to the utility grid, will generate harmonic pollution to power network, easy cause power grid voltage fluctuation and flicker, etc.,If there are many such power sources to transmit electricity to the grid, the power quality of the grid will be seriously degraded.Therefore, this kind of photovoltaic power generation system must be equipped with anti-backflow current facilities to prevent the occurrence of reverse power.

 

當光伏發電量大于負載需求電量時，會產生逆功率。因此，我們需要儀表來判定。逆變器有過功率輸出，再由儀表通過RS485通訊發出信號和逆變器數據交互，調節逆變器輸出功率，使其輸出功率和用電功率平衡。

When the photovoltaic power generation is greater than the load demand, the inverse power will be generated.So we need instruments to determine that Inverter has power output, and then by the instrument through RS485 communication ** and inverter data interaction, adjust the inverter output power, so that its output power and power balance.

 

2.項目概述Project Overview

菲律賓一家做光伏發電的公司，聯系到我司，尋找防逆流電表  ， 對接協議合適后， 采購我司的ACR10R-D16TE.

A photovoltaic power generation company in the Philippines contacted our company to look for anti-backflow current meters. After proper connection agreement, we will purchase ACR10R-D16TE from our company.

 

 3.防逆流檢測儀表Anti-backflow detection meter

 

 

當光伏發電量大于負載需求電量時，會產生逆功率。因此，我們需要儀表來判定逆變器有過功率輸出，再由儀表通過RS485通訊發出信號和逆變器數據交互，調節逆變器輸出功率，使其輸出功率和用電功率平衡。

When the photovoltaic power generation is greater than the load demand, reverse power will be generated. Therefore, we need an meter to determine that the inverter has over-power output, and then the meter sends a ** through RS485 communication to interact with the inverter data to adjust the output power of the inverter to balance the output power and the electrical power.

 

4.功能Function

 

 

 

 

 

5.接線Wiring

 

 

 

 

6.典型鏈接 Typical Connection

 

 

 

參考文獻 Bibliography

1.Solutions for enterprise micro-grid system

 


江蘇安科瑞電器制造有限公司專注于穿孔式電流變送器,電瓶車安全充電站,開關柜綜合測控裝置,水電氣能耗監控分析系統,水電氣智能遠傳集抄監控系統,智能電弧光保護裝置等

• 詞條

  詞條說明

• 電瓶車充電站有哪些功能？

  安科瑞 高佳樂電瓶車充電樁功能1、可同時充10輛電瓶車。2、尺寸空間大，箱容量大，內部空間充裕，具備充足的電氣安全性。3、實體按鍵設計，手感實在，使用壽命長。4、顯示數、IC次數、IC卡余額，卡內余額語音播報。5、每次扣費和充電時間可調，可多次，充電時間自動累計。6、可根據客戶需求開通免費充電功能、月卡功能和退費。7、可使用微信支付、支付寶支付、APP支付。8、自動識別出現故障的線路，并伴有字母和

• 導軌式電能表有哪些優勢？

  導軌式電能表有哪些優勢？電能表是用來測量電能的儀表，又稱電度表，火表，千瓦小時表，指測量各種電學量的儀表。目前的電能表左罩殼和右罩殼的裝配，主要有兩種方式，一是采用螺釘固定的方式，另一種就是采用超聲波焊接的方式。由于這兩種方式對罩殼結構要求不一樣，目前，通常將罩殼根據兩種方式的特殊要求而設計成兩種不同形狀的罩殼，現有技術無法兼容兩種罩殼，其原因在于：超聲波焊接這種裝配方式需要罩殼增加厚度為0.6m

• 組織結構

• 銀商科技園數據中心高低壓變電所建設項目電氣火災監控系統設計與應用

  安科瑞 陳玉茹摘要：本文簡述了電氣火災監控系統的組成原理，分析了電氣火災監控系統在應用中的設計依據和相關規范。通過安科瑞剩余電流式電氣火災監控系統在銀商科技園數據中心高低壓變電所建設項目電氣火災監控系統項目的實例介紹，闡述了電氣火災監控系統功能的實現及其重要意義。關鍵詞：?電氣火災；監控系統；Acrel-6000/B；?0?概述本項目主要負責監控現場分布于配電所內饋線