Application of Acrel ACR10R Series Intelligent energy meter with External Split core CT in Chile Pump Station

時間：2021-06-23作者：安科瑞電子商務（上海）有限公司瀏覽：152

朱鹍
安科瑞電氣股份有限公司  上海嘉定

1.Project Overview

  Chile pumping station through the PLC system monitoring and operation, to achieve unmanned duty. Since the customer request to detect the power consumption of each water pump in the pumping station, the customer chooses the Acrel ACR10R series, the external transformer intelligent meter solution, using split core current transformer and Simple DIN rail installation, Through RS485 communication docking PLC system linkage, real-time detection and upload power consumption data, easy to monitor and manage the pump station.

 

2.Product introduction 

  DIN rail multifunction electrical instrument with external Rogowski coil and split-core current transformer is applicable for the energy-saving reconstruction project in high energy consumption industries including the smelting, iron and steel, welding and semi-conductor industry. It is also suitable for applications such as the power monitoring of grid-connected cabinet for distributed photovoltaic power cabinet and energy demand management. It boasts of no need of bus removal, easy connection and safe construction, saving reconstruction cost and raising efficiency for the user. It integrates the measurements of all electric parameters (including single-phase or three-phase current, voltage, active power, reactive power, apparent power, frequency and power factor）and comprehensive energy monitoring and examination management. Meanwhile, it also has various peripheral interfaces for the user to choose: the RS485 communication interface with Modbus-RTU protocol can meet the need of online communication management; the interfaces with switch input and relay output can realize the remote **ing and remote control of the circuit breaker switch. It is very suitable for real-time power monitoring system with an LCD display and the panel buttons to realize the setting and control of parameters

 

3.Model description


4.Technical Parameters


5.Wiring & Installation

 Figure 1 Wiring Graph


 
 Figure 2 Shape and installing size （unit：mm）

 

work Topology


7.Installation Site

 

 

8.Inconclusion

  ACR10R series of ACR10R series DIN Rail-type Multifunction Energy Meter with External Split Core Current Transformer adopts DIN35mm guide rail type installation structure, small volume, standard three open type current transformers, can measure electric energy and other electrical parameters, can set the parameters such as clock, rate period, high precision and good reliability. Through RS485 communication, connecting PLC system to read energy consumption data, to help customers monitor the operation of equipment in real time.

Bibliography


1.Solutions for enterprise micro-grid system

作者簡介：
朱鹍，女，就職于安科瑞電氣股份有限公司，主要研究方向?yàn)槠髽I(yè)能源管控



安科瑞電子商務（上海）有限公司專注于變電所運維云平臺,安全用電管理云平臺,環保用電監管云平臺等, 歡迎致電 15000353138

• 詞條

  詞條說明

• 陽光東尚S5地塊智能照明控制系統的設計和應用

  朱鹍安科瑞電氣股份有限公司，上海 嘉定 201801；摘要：本文以安科瑞智能照明系統在陽光東尚S5地塊的應用為案例，介紹智能照明系統實現對現場設備的系統集成，數據的采集、傳輸以及存儲，驗證了該系統的功能及實用性。關鍵詞：陽光東尚S5地塊；智能照明1 概述??????? ASL1000智能照明監控系統，采用與KNX兼容的Acrel

• 醫用隔離電源系統在某醫院手術室中的應用

  【摘要】介紹該三級乙等綜合醫院手術室采用安科瑞醫用隔離電源系統，使用分體配電柜安裝方式，從而實現將TN系統轉化為IT系統，以及系統絕緣情況監測?！娟P(guān)鍵詞】三級乙等綜合醫院；手術室；IT系統；絕緣情況監測。0前言? 該醫院占地面積4.2萬平方米，建筑面積7.14萬平方米，開放床位868張。是一所三級乙等綜合醫院。本項為急診住院綜合大樓項目，其中醫用隔離電源用于手術室以及同樓層ICU區域。&

• 水處理行業電能質量監測與治理系統解決方案

  摘要：在水處理行業供配電系統中，涉及曝氣風機、提升泵、污泥脫水設備等感性負荷設備，導致異步電動機產生較多無功功率和大量的諧波，使部分設備表現出輕載或不滿載運行狀況降低功率因數，以及諧波對配電系統、負載產生較大的危害。就此，水處理需提高對電能質量的重視，通過有效的無功補償、諧波治理措施，調節功率因數和濾除諧波，從而節能降耗。關鍵詞：水處理行業供配電系統；無功功率；諧波；功率因數；電能質量

• 淺談基于 MEMS 結構的配電站環境狀態監測及自動化運維裝置的研究

  淺談基于 MEMS 結構的配電站環境狀態監測及自動化運維裝置的研究朱鹍安科瑞電氣股份有限公司? ?上海嘉定? ?201801摘? 要 ：本文研究的配電站智能化方案設計是按照“以人為本”、功能實用、技術、運行可靠、經濟合理、可擴展等各方面綜合考慮的，且充分滿足配電站綜合技防的功能要求，并將電力物聯網建設總體規劃作為目標，本著科學規劃、安全可靠、資