輥道報**得信賴“本信息長期有效”

時間：2020-03-09作者：鞍山市圣霖進出口貿易有限公司瀏覽：35

輥道是軋鋼車間運送軋件的主要設備，其重量占整個軋鋼車間設備總重量的40%左右，是軋鋼車間中使用較多的設備。軋件進出加熱爐，在軋機上往復軋制及軋后輸送到精整工序等工作均由輥道來完成。







Roller table is the main equipment for rolling parts in rolling workshop. Its weight accounts for about 40% of the total weight of the whole rolling workshop. It is the most used equipment in rolling workshop. Rolling in and out of the heating furnace, the rolling mill on the rolling mill and after rolling to the finishing process and other work are completed by the roller.










為使鑄坯平穩迅速地運送，有時將這個區的輥道設計成可升降的。輥道按驅動方式可分為集中傳動輥道和單獨傳動輥道兩種。集中傳動輥道由一臺電機帶動一組輥?zhàn)?，通過電機一減速機一鏈輪傳動，或者通過電機一減速機～長軸一傘齒輪傳動方式傳動。







In order to deliver the billet smoothly and quickly, the roller table in this area is sometimes designed to be lifted and lifted. The roller table can be divided into two types: the ?drive roller and the separate drive roller. The ?driven roller table is driven by a motor to a set of rollers, driven by a motor, a reducer or a sprocket, or through a motor, a reducer, a long shaft and a bevel gear transmission mode.




鏈板輸送機以標準鏈板為承載面，由馬達減速機為動力傳動；我們可以通過多列鏈板并行，使鏈板輸送機做的很寬并形成差速，利用多列鏈板的速度差使多列輸送在無擠壓的情況下變?yōu)閱瘟休斔汀?/span>







The chain plate conveyer takes the standard chain plate as the bearing surface, and the motor reducer is driven by the motor. We can make the chain conveyor be very wide and form the differential speed through the multi chain chain plate.




鞍山市圣霖進出口貿易有限公司專注于型材設備,軋鋼設備,軌道設備等

• 詞條

  詞條說明

• 圣霖軋鋼設備生產廠服務為先

  我國經濟一直快速穩定發展，而軋鋼設備行業也是迅速發展，在我國軋鋼機設備行業中，自動化和計算機控制系統主要還是靠引進。 China's economy has been developing rapidly and steadily, and the steel rolling equipment industry is developing rapidly. In China's steel r

• 輥道報**得信賴“本信息長期有效”

  輥道是軋鋼車間運送軋件的主要設備，其重量占整個軋鋼車間設備總重量的40%左右，是軋鋼車間中使用較多的設備。軋件進出加熱爐，在軋機上往復軋制及軋后輸送到精整工序等工作均由輥道來完成。 Roller table is the main equipment for rolling parts in rolling workshop. Its weight accounts for about 40%

• 沈陽420rolling mill歡迎來電

  半閉口式機架是機架與機架蓋之間采用斜楔連接的一種機架。這種機架兼有開口式機架和閉口式機架的優點，裝卸、換輥方便，制造容易，并有較高的剛度，故一般大中型的型鋼軋機都采用這種形式的機架。 A semi closed frame is a frame with a wedge between the frame and the frame cover. The rack has the advanta

• 圣霖聯接機采購點擊了解更多

  切向鍵聯接：它由兩個普通楔鍵組成。其上下兩面（窄面）為工作面，其中之一面在通過軸心線的平面內。工作面上的壓力沿軸的切線方向作用，能傳遞很大的轉矩。 Tangent key join: it consists of two common wedges. Both sides of the upper and lower sides (narrow surface) are working face